DROOP + REIN TFS 22 40 DT D40 P Frezarki bramowe sterowana numerycznie

x-axis: 10.100 (2x 5.000) mm
y-axis: 3.000 mm
z-axis: 1.500 mm
Control: Sinumerik 840 D Siemens
distance between columns: max. 3.000 mm
passage: max. 1.950 mm
distance spindle center to table: max. 1.800 mm
distance spindle nose and table: 1.350 / 1.500 mm
Main spindle::
type: P 8005020/00-4
turning speed range - main spindle: max. 18.000 min/-1
power capacity - main spindel: 20 kW
max. Torque: 48 Nm
tool taper: HSK-A63 DIN 69063
Spindle Extension: 450 mm
swivellable: B: +110° / -10 °
rotatable: C: +/- 200 °
Main spindle::
type: P 8002320/00-4
turning speed range - main spindle: 20 - 5.000 min/-1
power capacity - main spindel: 40 kW
max. Torque: 1.100 Nm
tool taper: HSK-A100 DIN 69063
Spindle Extension: 300 mm
swivellable: B: +110° / -10 °
rotatable: C: +/- 200 °
work table::
table surface area: 4.000 x 2.200 (2x) mm
max. table load: 12 / 20 t
height over floor: 700 mm
number of T-slots: 11 + 19
T-slot - width: 28H7 mm
T-slot - distance: 200 mm
Tool-Presetter::
number of toolpositions: 327 pos.
number of toolpositions: HSK A63: 156 pos.
number of toolpositions: HSK A100: 171 pos.
max. tool diameter: HSK A63: 52 mm
max. tool length: HSK A63: 250 / 500 mm
max. tool weight: HSK A63: 5,0 kg
max. tool diameter: HSK A100: 315 mm
max. tool length: HSK A100: 500 / 800 mm
max. tool weight: HSK A100: 40,0 kg
feeds::
feed speeds: X: max. 30.000 mm/min
feed speeds: Y/Z: max. 40.000 mm/min
feed speeds: B: 3.600 °/min
feed speeds: C: 2.160 °/min
Accelaration: X: max. 1,5 m/s²
Accelaration: Y/Z: max. 3,2 m/s²
axis stroke::
x-axis: 10.100 (2x 5.000) mm
y-axis: 3.000 mm
z-axis: 1.500 mm
b-axis: +110° / -10 °
c-axis: +/- 200 °
total power requirement: 150 kVA
weight of the machine ca.: - t
dimensions of the machine ca.: 25,0 x 12,0 x 7,0 m
Documents:
Chip conveyor: 2x
Coolantsystem:
through spindle coolant:
Automatic Tool Changer:
changing system: Spindelkopf / Spindlehead
turning milling head:
Rotary screen:
elektr. hand wheel:
test probe: m&h RWP 20.10
Minimal quantity lubrication:
breakage control: Renishaw
5-Axis Gantry-Big-Machining-Center
DROOP + REIN - TFS 22 40 DT D40 P
- two Milling-Heads
- ca. 4.000 Power On Hours
- X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table)
- 3 axes simultaneously (X, Y, Z)
- 2 positioning axes (B, C)
- tools upon request
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.