dmg mori ctx beta 800 tc używana maszyna na sprzedaż No. 166896761

General
- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate
Working area
Swing diameter over guide ways	500 mm
Turning diameter	500 mm
Max. Turning Length	800 mm
Bar diameter max.	65 mm
Work spindle (left)
Spindle nose	Flat flange
Diametre of spindle nose	170h5 mm
Spindle diametre on front bearing	130 mm
Spindle bore	87 mm
Main drive 1
Drive power (100% DC)	25 kW
Drive power (40% DC)	32 kW
Speed range	- 5000 rpm
Torque (100% DC)	280 Nm
Max. torque (40% DC)	360 Nm
C-Axis Speed	-5000 rpm
Torque of C-Axis (holding torque)	280 Nm
Turning-milling spindle
Spindle taper	HSK-A 63 DIN 69893
Spindle speed	-12000 rpm
Drive power (100% DC)	19 kW
Drive power (40% DC)	22 kW
Torque (100% DC)	85 Nm
Torque (40% DC)	100 Nm
locking moment	1000 Nm
Floor space/Weight
Dimensions (L x W x H)	4,78 x 2,2 x 2,02 m
Weight approx.	10000 Kg

Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
5-axis simultaneus machining	5-axis simultaneous machining
Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
3D quickSET (with toolkit)	3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-
ATC	Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous)
5X Precision & Dynamics package	5X Precision & Dynamics package, consisting of: - 5-axis simultaneous machining - 3D-QuickSET - ATC
DXF-Reader for Siemens	DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements
Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
Clamping pressure adjustment, motor-adj. valves MS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
Dyn. two-pressure clamping, motor-adj. valves CS	Dynamic two-pressure clamping for the counter spindle with motor-adjustable valves The clamping pressure can be specified by the NC program
Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lbft - Speed range 0-6000 rpm - Partial hollow clampin
Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
BFU 8/20 bar, 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
Workpiece touch probe TC62, BLUM	Workpiece touch probe TC 62, BLUM - Dimensions basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm (1.5 in) - Interchangeable in turning/milling spindle - Sending and receiving unit with probe tip - Incl. cycle package Quickstart
Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
2 multi tools for turning	Set (2 pieces) of multitools for turning Clamping area 25 mm, 3-fold holder
3-jaw chuck, BHD 250-66, make SMW	3-jaw power clamping chuck with through-hole, type BHD 250/66, make SMW, incl. connecting elements
3-jaw chuck, BHD 210-52, make SMW	3-jaw power clamping chuck with through-hole, type BHD 210/52, make SMW, incl. connecting elements
proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
Ligh switch cabinet	Ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 D51252871 V, 2 A load, make Rittal on lott via Transformer chead main switch
Hydraulic filter with monitoring and prewarning	Hydraulic filter with monitoring and prewarning consisting of: - DIN filter with bypass - Pressure switch for filter monitoring with prewarning Note: On machines with a milling spindle, both the hydraulic filter for the oil-air lubrication and the f
Package for increased ambient temperature	Package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
Service Agent	Service Agent Overview of all maintenance work on the machine
YOUR CELOS Backup Stick	Your CELOS Backup Stick Backup your CELOS machine tool with Siemens or Heidenhain Control
3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
Module 25 kg	Module 25 kg - Max. load of the robot 25 kg (55.1 lbs) - Gripper base with outlet lance Note: Indicated is the maximum load of the robot in the tool center point. The maximum workpiece weight is depending on the grippers and the workpiece length.
Robo2Go	Flexible workpiece loading and unloading system with a six-axis-industrial-robot - Replaceable workpiece storage incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) - Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the tray
3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
2x Additional 2-jaw gripper	2x Additional 2-jaw gripper for: - Chuck and shaft parts - Inside and outside handle 10kg module: - Diameter 20-80 mm (shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm (shaft) (0.78-6.69 in)
Pressure piece	Elastic pressure piece for compensation angle errors at sawing sections
Workpiece tray for shaft parts	Workpiece tray for shaft parts - Max. load of the tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in), workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece support kits (variably pluggable) with 50 mm (1.96 in) division:
Robot in white exterior paint	Robot in special paint calcite white (RAL 9010)
Attention: Preparation for automation is necessary	Attention: Preparation for automation is necessary For the connection of the Robo2Go the machine needs to be prepared with the electrical interface.
Overall declaration of conformity Siemens	Overall declaration of conformity according to Machine directive 2006/42/EC, for the system Robo2Go + machine with Siemens The supplementary technical documentation of the declaration of overall conformity consist of: - An overview drawing of the ma

Udostępnij tę maszynę na Facebook:

General
- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate
Working area
Swing diameter over guide ways	500 mm
Turning diameter	500 mm
Max. Turning Length	800 mm
Bar diameter max.	65 mm
Work spindle (left)
Spindle nose	Flat flange
Diametre of spindle nose	170h5 mm
Spindle diametre on front bearing	130 mm
Spindle bore	87 mm
Main drive 1
Drive power (100% DC)	25 kW
Drive power (40% DC)	32 kW
Speed range	- 5000 rpm
Torque (100% DC)	280 Nm
Max. torque (40% DC)	360 Nm
C-Axis Speed	-5000 rpm
Torque of C-Axis (holding torque)	280 Nm
Turning-milling spindle
Spindle taper	HSK-A 63 DIN 69893
Spindle speed	-12000 rpm
Drive power (100% DC)	19 kW
Drive power (40% DC)	22 kW
Torque (100% DC)	85 Nm
Torque (40% DC)	100 Nm
locking moment	1000 Nm
Floor space/Weight
Dimensions (L x W x H)	4,78 x 2,2 x 2,02 m
Weight approx.	10000 Kg

Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
5-axis simultaneus machining	5-axis simultaneous machining
Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
3D quickSET (with toolkit)	3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-
ATC	Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous)
5X Precision & Dynamics package	5X Precision & Dynamics package, consisting of: - 5-axis simultaneous machining - 3D-QuickSET - ATC
DXF-Reader for Siemens	DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements
Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
Clamping pressure adjustment, motor-adj. valves MS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
Dyn. two-pressure clamping, motor-adj. valves CS	Dynamic two-pressure clamping for the counter spindle with motor-adjustable valves The clamping pressure can be specified by the NC program
Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lbft - Speed range 0-6000 rpm - Partial hollow clampin
Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
BFU 8/20 bar, 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
Workpiece touch probe TC62, BLUM	Workpiece touch probe TC 62, BLUM - Dimensions basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm (1.5 in) - Interchangeable in turning/milling spindle - Sending and receiving unit with probe tip - Incl. cycle package Quickstart
Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
2 multi tools for turning	Set (2 pieces) of multitools for turning Clamping area 25 mm, 3-fold holder
3-jaw chuck, BHD 250-66, make SMW	3-jaw power clamping chuck with through-hole, type BHD 250/66, make SMW, incl. connecting elements
3-jaw chuck, BHD 210-52, make SMW	3-jaw power clamping chuck with through-hole, type BHD 210/52, make SMW, incl. connecting elements
proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
Ligh switch cabinet	Ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 D51252871 V, 2 A load, make D51252871 Rittal on lott via Transformer chead main switch
Hydraulic filter with monitoring and prewarning	Hydraulic filter with monitoring and prewarning consisting of: - DIN filter with bypass - Pressure switch for filter monitoring with prewarning Note: On machines with a milling spindle, both the hydraulic filter for the oil-air lubrication and the f
Package for increased ambient temperature	Package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
Service Agent	Service Agent Overview of all maintenance work on the machine
YOUR CELOS Backup Stick	Your CELOS Backup Stick Backup your CELOS machine tool with Siemens or Heidenhain Control
3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
Module 25 kg	Module 25 kg - Max. load of the robot 25 kg (55.1 lbs) - Gripper base with outlet lance Note: Indicated is the maximum load of the robot in the tool center point. The maximum workpiece weight is depending on the grippers and the workpiece length.
Robo2Go	Flexible workpiece loading and unloading system with a six-axis-industrial-robot - Replaceable workpiece storage incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) - Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the tray
3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
2x Additional 2-jaw gripper	2x Additional 2-jaw gripper for: - Chuck and shaft parts - Inside and outside handle 10kg module: - Diameter 20-80 mm (shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm (shaft) (0.78-6.69 in)
Pressure piece	Elastic pressure piece for compensation angle errors at sawing sections
Workpiece tray for shaft parts	Workpiece tray for shaft parts - Max. load of the tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in), workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece support kits (variably pluggable) with 50 mm (1.96 in) division:
Robot in white exterior paint	Robot in special paint calcite white (RAL 9010)
Attention: Preparation for automation is necessary	Attention: Preparation for automation is necessary For the connection of the Robo2Go the machine needs to be prepared with the electrical interface.
Overall declaration of conformity Siemens	Overall declaration of conformity according to Machine directive 2006/42/EC, for the system Robo2Go + machine with Siemens The supplementary technical documentation of the declaration of overall conformity consist of: - An overview drawing of the ma

seller offer No. resale 071548

Udostępnij tę maszynę na Facebook:

Dodaj do listy oglądania

	DMG MORI	CTX beta 800
2017	DMG MORI	CTX beta 800
2015	DMG MORI	CTX beta 800 TC
	DMG MORI	CTX beta 800
	DMG MORI	CTX beta 800 TC
	DMG MORI	CTX beta 800
	DMG MORI	CTX beta 800
2012	DMG MORI	CTX BETA 800 4A
	DMG MORI	CTX beta 800
2015	DMG MORI	CTX Beta 800 4a

2014	DMG MORI	CTX beta 1250/TC	105000 EUR	[Nov 2022]
2014	DMG MORI	CTX beta 1250/TC	34900 EUR	[Oct 2024]
2014	DMG MORI	CTX ECOTURN 650	97000 EUR	[Nov 2019]
2009	DMG MORI	CTX 310 ECO	36000 EUR	[Oct 2020]
2015	DMG MORI	CTX 510 ECO	105000 EUR	[Sep 2019]
	DMG MORI	CTX 420 linear V3	46900 EUR	[Mar 2021]
2014	DMG MORI	CTX ECOTURN 650	110000 EUR	[Nov 2019]

Frezarki okrągłego stołu DMG MORI CTX beta 800 TC

Zapytanie ofertowe

Sprzedawca

Zapytanie ofertowe

więcej DMG MORI CTX beta 800 TC + similar DMG MORI-Model

Cena: sold DMG MORI CTX beta 800 TC + podobne DMG MORI-Model