inne maszyny do obróbki metalu używane na sprzedaż (11,172)

Serial Number: 00826Voltage: 400 VMax. Power: 230 kVA

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure

Condition: used and unchecked.

KNOLL coolant system and chip conveyor, toolchanger positions: 160, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg

With footswitch

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

KNOLL coolant system and chip conveyor, toolchanger positions: 160, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg

Consisting of two punching stations, driven by pneumatic cylindersincl. Installed punching toolon pedestalDimensions of the pedestal: 560 x 300 x 170 mm

Brand: NaberthermType: N 41/HControl: P300Electrically heated chamber furnace from Nabertherm with base. The furnace is suitable for heat treatment processes such as hardening, annealing or sintering. It is operated via the integrated P300 controller. Sale including documented accessories according to the scope of delivery. Condition:• Used• Normal signs of wear due to age and use• Refractory lining with visible signs of use• Control and display availableScope of delivery:• Chamber furnace Nabertherm N 41/H• Underframe• Control P300• Documentation (operating documents)• Accessories as shown• Delivery as shown• Manufacturer: Nabertherm• Model: N 41/H• Year of construction: 2010• Max. temperature: 1280 °C• Connection: 400 V / 3-phase / N / PE• Frequency: 50/60 Hz• Connected load: 15.0 kW• Control: P300• Degree of protection: IP according to nameplate ...

Hydraulic Machine Vise Jaw width 125 mm Clamping range 200 mm Clamping height 40 mm incl. turntable Weight 55 kg Condition: unchecked (6)

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Technical data Note: There was no original machine documentation. To the best of our knowledge, all subsequent technical data were partly read from the nameplate and taken from publicly accessible sources. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1989 Machine Type: Eccentric Press / Stamping Press Press force: 250 kN Projection: 190 mm Plunger stroke: 20 mm Stroke rate: approx. 70 1/min Motor power: 1.5 kW Operating voltage: 380 V Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Hydraulic/Lubrication System Separate control cabinet Foot pedal

LED Machine Lights 230Volt / 12Watt With screw-on base and lockable joint. see pictures Condition: never used / new (5)

Machine number: 61/3Operating voltage: 380 VFrequency: 50 HzRated current: 9.2 AConnection: 3.0 kWCutting length: up to 1040 mmSheet thickness: up to 2.5 mm

For more specifications, see PDF.

Lot solid carbide drills and thread millsManufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mmThread mills: from M3 to M12approx. 10.0 kg

Operating voltage: 220/380 VFrequency: 50 HzReel diameter: approx. 1100 mm

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12

Extensive tool package consisting of 41 tool holders with SK45 holder. Different designs for drilling, milling and clamping work. Scope:– 41 × SK45 tool holders– Various designs, including:  • Chuck holders  • Milling cutter holders  • Collet holders  • Special and intermediate holders – Accessories included – Tool stands / holders in which the SK45 tool holders are stored – Sold as shown

"Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring PlateDigital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate.The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear presentScope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plateDigital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in JapanMeasuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom for hold ...

"Keyless chuck with Morse taper adapterThree RÖHM Spiro 3 keyless chucks with Morse taper. Manufacturer: RÖHMSeries / Type: Spiro 3Holder: Morse taper MK2Clamping range: 3 – 16 mmQuantity: Item 3 pieces"

Consisting of: Table 1 x Vibratory metering, type VD4 1 x spiral conveyor type BF 40-L12

Collet set SK40 consisting of: A box with: 18 collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,16, 17, 18, 19, 20mm. and a box with: Collet holders and wrenches Weight 4.5 kg Dimensions L x W x H 350 x 250 x 100 mm Condition: never used / new (5)

Clamping angle Clamping area each 900 x 11005mm Footprint 900 x 500mm See pictures

Without support, only the top including base

Brand: unknown / Hardening plantplant Type: Extraction table / Extraction hoodName: Industrial extraction table with hoodDescription: Industrial extraction table from a hardening shop with integrated extraction hood and connection nozzle for external extraction system. Designed for work with smoke, dust and fumes, e.g. when removing, cooling or post-processing heat-treated workpieces. Solid steel construction with open work surface and rear intake grille. Sold without connected extraction technology. Condition:• Used• Industry-typical signs of use• No structural damage recognizable• Extraction hood and housing stableScope of delivery:• Extraction table with integrated extraction hood• Connection connection for extraction line• Delivery as shown• Without external extraction or fan• Design: Stationary extraction table• Material: Sheet steel / steel frame• Suction: Rea ...

as good as new current new price: 12,000 EUR at Heidenhain

"Manufacturer: EROWAType: ITS Electrode Holders / Clamping Blocks / Electrode HoldersEROWA ITS Electrode Holder Set – 38 piecesLarge lot consisting of a total of 38 electrode holders and clamping blocks for the EROWA ITS clamping system.The holders are used to pick up and position copper or graphite electrodes in tool and mould making on die-sinking EDM machines. The lot includes various designs such as electrode holder base bodies, clamping blocks and holders for individual electrode production.Compatible with EROWA ITS clamping systems and corresponding chucks. • Manufacturer: EROWA • System: ITS clamping system • Application: die-sinking EDM (EDM) • Number of parts: 38 pieces • Material: brass / steel • Origin: Switzerland • Condition: used, good condition"