obróbka blach używane na sprzedaż (3,277)

Faceplate bending machine, faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter faceplate: 1330 mm -clamped disc diameter: 775 mm -for an additional charge: other discs can be produced -Gear motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

punching pressure: 45.0 tpunch diameter: 22 in 15.0 mmpunch diameter: 38 in 8.0 mmround bar steel: 30.0 mmsquare edge steel: 25.0 L-beam: 100 x 10.0 mmshear: flat material: 300 x 12.0 mmadjustment of stroke: 0 - 55 mmwork height max.: 940 / 1140 mmstrokes per minute: 34 punch diameter: max. 110 mmvoltage: 400 Vtotal power requirement: 4.5 kWweight: 1245 kgdimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic profile steel shear- With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Side support surfaces- 1x freely movable foot switch- Central lubrication system- Connection cable + connectorThe data for this ad was created with ModulMWS - the softwa ...

pressure: 30.0 tpunching cross-cut in cmm: 30.0 in 9.0 mmstroke: ca. 35 Hub/minthroat: 610 mmstroke - stepless adjustable: 0 - 28.0 mmoil volume: 35.0 lwork height max.: 1010 mmtotal power requirement: 4.0 kWweight of the machine ca.: 1200 kg.range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies)Furnishing:- electro-hydraulic hole punch, with large throat- Material/sheet metal scrapers including scraper plates- Large material support table, with adjustable depth stops- continuous stroke adjustment- freely movable foot switch including protective cover- Forklift pockets for easy transport- side storage area- lots of accessories + tools - including tool cabinet- Matrix base (for special size matrices)- Stamp holders (for special size stamps)- original user manuelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

pressure: 70.0 tpunching cross-cut in cmm: 27 in 20 mmpunching cross-cut in cmm: 32 in 14 mmwork height max.: 1060 mmcolumn arm: 500 mmweight of the machine ca.: 1500 kg.total power requirement: 7.0 kWrange L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on requestEquipment:- electro-hydraulic hole punch, with large projection- large GEKA stop table with movable stop system- sheet metal stripper with stripper plates- stepless stroke adjustment- die base- 1x freely movable foot switch- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tpunching cross-cut in cmm: Ø 31 in 25 mmstroke: 10 - 50 mmcolumn arm: 510 mmwork height max.: 1100 mmno. of strokes: 14 - 45 Hub/minpunch diameter: max. Ø 90.0 mmoil volume: 103 ltotal power requirement: 7.5 kWweight of the machine ca.: 2400 kg.range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing:- heavy / robust electro-hydraulic hole punch, with large throat- Punching station with material/sheet metal scraper- stepless stroke adjustment .. 10-50 mm- freely movable foot switch including protective cover- hydraulic low pressure finder for foot switch operation- Crane hanging eye for easy transport- side storage area- Hydraulic unit, integrated- Three-phase motor, 400 volts, 50 Hz- original instruction manualThe data for this ad was created with ModulMWS - the software solution of ...

pressure: 80,0 tpunching cross-cut in cmm: 31,0 in 25 mmshear: flat material: 500x18 / 300x22 mmL-beam: 150 x 12 mmround bar steel: 50 + 25 mmsquare edge steel: 50 + 30 mmthroat: 510 mmblade length: 500 mmwork height max.: ca. 1.100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshopFurnishing:- Robust electro-hydraulic combined profile steel shears- Notcher, hole punch, bar steel knife, profile knife and tin snips- Stop table at the hole punch, with blank holder- Stop table at the notcher- 2x floating footswitches- Stroke adjustment for fast stroke sequence- 1x PEDDINGHAUS contact length stop: 1.000 mm- Safety devices- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 3200 kgrange L-W-H: 4500 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

sheet width: 3100 mmplate thickness: 13.0 mm STpre-bending: 10.0 mm STdiameter of upper rolls: 300 mmside roll diameter: 270 mmbending speed: 4.5 m/minvoltage: 415 Vtotal power requirement: 11.0 kWweight: 8200 kgrange L-W-H: 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon requestEquipment:- Robust electro-hydraulic 3-roll bending machine- Induction-hardened rolls- Robust machine body + stable welded construction- SIEMENS ELGO digital position indicator Position indicator for the two side rolls- Freely movable control panel- Curved side roll feed- Electro-hydraulic conical bending device- Electro-hydraulic safety chuck- Pressure gauge/pressure indicator for the rolls- Operating instructions (PDF) Special equipment included:- 2x AK BEND SIDE supports (lateral sheet metal support system)- Bending rolls with profile roll extension Include ...

sheet width: 3050 mmplate thickness: 3.0 mm STpre-bending capacity: 3.0 mm STupper roll diameter: 170 mmlower roll diameter: 170 mmside roll diameter: 180 mmControl: konv. 0: 380 Vtotal power requirement: 3.0 KWweight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metalsEquipment:- Electro-hydraulic 3-roll bending machine- Asymmetrical roll arrangement- Electro-motor-driven side roll adjustment Including digital position display- Manual bottom roll adjustment Via hand crank- Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position- Hardened rolls SAE 1050 CK 45- Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forklift/crane)- Safety device- Connection cable + connector- 4-way foot switch 2 buttons for side roll movement ( ...

sheet width: 1070 mmplate thickness: 4.0 mmpre-bending: 3.0 mmroll length: 1070 mmroll diam. toproll: 110 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 848 kgrange L-W-H: 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW ()Equipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (top & bottom roller)- right/left running of the rollers- top roller can be manually swiveled out, with folding bearing- manual delivery of the side roller- including conical bending device- asymmetrical roller arrangement- rollers with profile inlets- safety device (safety line with switch unit)- 1x freely movable control panel- operating instructions (ENG)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

plate thickness: 6.0 mm STthickness at Niro-steel: 4.0 mmplate thickness: 8.0 mm ALUangle adjustable from - to: 30 - 140 Gradtable:: 950 x 890 mmblade length: 220 x 220 mmstroke: 35 H/minwork height max.: 1150 mmtotal power requirement: 3.0 kWweight: 800 kgrange L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=QmUbaV41BfAEquipment:- electro-hydraulic notching machine with adjustable angle 30° – 140°- cutting capacity up to 6.0 mm sheet thickness (R42/mm2)- made of the special spheroidal cast iron GS500.- the cutting movement takes place from top to bottom- robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles- the scales are embossed- automatic cutting gap adjustment (patented)- system for the automatic adjustment of the gap betwee ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 8.0 mm STplate thickness: 5.0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60.0 lengine output: 4.0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switc ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4.0 mm: 3.0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3.0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried ou ...

plate thickness: 4.0 mmthickness at Niro-steel: 3.0 mmblade length: 200 mmangle adjustable from - to: 30 - 120 Gradno. of strokes: 60 Hub/minoil volume: 60.0 ltr.table:: 1000 x 800 mmtotal power requirement: 2.62 kWweight: 800 kgrange L-W-H: 1000 x 1500 x 1440 mmFurnishing:- robust hydraulic notching machine, with adjustable angle- Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels- hydraulic clamping and locking- Infinitely adjustable cutting depth, with digital display- 2x locking accuracy stop, with stop bars- Stripper for sheet metal cutting- Collecting container for clippings- Freely movable foot pedal for triggering the strokeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 4.0 mmdistance between columns: 1100 mmstroke of upper beam: 250 mmLower beam adjustment: 50.0 back stop - adjustable: max. 750 mmcontrol: POS 400 total power requirement: 4.4 kWweight: 1960 kgrange L-W-H: 2065 x 1500 x 1425 mmEquipment:- Robust electric-driven folding machine- With dynamic, powerful drive motors- SCHRÖDER NC control unit POS 400 Bending angle preselection Control panel, right front- Manual backgauge, adjustable from the rear Adjustment range up to max. 750 mm- Manual lower beam adjustment- 1x freely movable double foot switch- 1x set of bending tools- Emergency stop button at the front- Original operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 13800 kgrange L-W-H: 5150 x 2250 x 3000 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 s ...

diameter of brush: 250 mmwidth of brush: 80 mmturning speed range: 1500 / 3000 U/minvoltage: 380 Volttotal power requirement: 2,0 / 3,0 kWweight of the machine ca.: 175 kgdimensions of the machine ca.: 800 x 400 x 1.300 mmFurnishing:- Deburring handy sheets with notches and contours- Sheet thicknesses up to 6.0 mm are rounded quickly and safely- without forming a secondary ridge- the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush- Simple high speed radial brush rotation- Materials: Steel, stainless steel, aluminium, other non-ferrous metals Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9238987The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 1.5 mmroll length: 1270 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 400 kgrange L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmno. of strokes: 18 Hub/mindown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel ...

I-beam section - upend: 120 x 25 (d 1600) mmbar material dia. max.: 140 x 3 (d 3000) mmL-beam: 100x100x10 (d 1600) mmsquare material: 140 x 40 x 3 (d 4000) mmI - beam section - flat steel: 200 x 35 (d 1000) mmbar material - diameter: 70,0 (d 800) mmtool taper: 100,0 mm0: 315 mmturning speeds: 5,4 m/min.total power requirement: 11,0 kWweight: 2.240 kgrange L-W-H: 1500 x 1650 x 2100 mmFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- Digital position display of the bottom/side rollers Display with TouchScree function- hardened tool holder (42CrMo4)- Machine base- 2x hydraulically adjustable side guides- Horizontal and vertical work possible- freely movable control panel- Pressure gauge / pressure indicator for the rol ...

sheet width - max.: 1255 mmplate thickness: 4.0 mm STplate thickness: 2.0 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1.5 °total power requirement: 5.5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3.0 kWtable height: 810 mmweight of the machine ca.: 1150 kg.range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop ()Furnishing:- robust electro-motorized metal sheet shears- manual backgauge- adjustable up to 610 mm, using the handwheel from the back- 1x side stop including mm scale- 2x table sheet metal support arms- Piece counter- freely movable foot switch- rear sheet metal slide- EMERGENCY stop button at the front Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325126The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - upend: 100 x 20 (d 2100) mmbar material dia. max.: 100 x 3 (d 3000) mmL-beam: 80x80x8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmI - beam section - flat steel: 120 x 30 (d 600) max.140b mmbar material - diameter: 60.0 (d 1000) mmtool taper: 80.0 mmoil volume: 100 Literturning speeds: 4.2 m/min.weight: 1600 kgrange L-W-H: 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x hydraulically adjustable side guides- horizontal and vertical wo ...

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll length: 1050 mmroll diameter: 90,0 mmmin. dia.: 130,0 mmengine output: 1,1 kWweight: 570 kgrange L-W-H: 1.800 x 800 x 1.130 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 5.5 mmpre-bending: 5.0 mmroll diam. toproll: 140 mmmin. dia.: 210 mmturning speeds: 5.7 U/minengine output: 2.2 kWweight: 1365 kgrange L-W-H: 2020 x 900 x 1.200 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.