piły używane na sprzedaż (1,265)

cutting diameter: 220 mmsaw band length: 2450 mmcutting width: 250 mmcutting speed: 40 / 80 m/mindimensions of saw-band: 2450 x 27 x 0,9 mm: 100 mm: 90 mm: 90 x 90 mm: 160 mm: 160 x 110 mm: 250 x 190 mmtotal power requirement: 0,75 / 1,1 kWtable height: 925 mmweight of the machine ca.: 218 kgdimensions of the machine ca.: 1300 x 700 x 1530 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mmcapacity 90 degrees: flat: 350 x 200 mmcapacity 45 degrees: round: 250 mmcapacity 45 degrees: flat: 230 x 200 mmcapacity 60 degrees: round: 175 mmcapacity 60 degrees: flat: 170 x 100 mmcutting speed: 18 - 110 m/minvice: max. 350 mmdimensions of saw-band: 3370 x 27 x 0.9 mmengine output: 1.5 / 1.8 kWweight of the machine ca.: 880 kgrange L-W-H: 1700 x 2200 x 2000 mmEquipment:- robust, electro-hydraulic fully automatic band saw- user-friendly controls- Mitre cuts left to 45. possible in automatic mode- Mitre cuts up to 60°. only possible in semi-automatic mode- Hydraulic power unit with automatic. pressure cut-off when idling- Stationary base frame with large chip drawer and automatic cooling system- infinitely variable saw blade speed adjustment (ESC)- rotating chip brush- remnant min. 80 mm- operating instructions (PDF)The data for this ad was created with Modu ...

capacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180x70 mm: 110 mm: 95 mm: 135x60 mm: 120 mm: 100 mm: 135x60 mm: 180 mmdimensions of saw-blade: 350x32x3,4 mmturning speeds: 1700/3400 U/minweight of the machine ca.: 600 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 €: 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm: 45 / 90 m/min: 225 mm: 180 x 245 mm: rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm: 1.1 kW: 1500 mm: 700 mm: 1400 mm: 225 kgDownfeed with damper cylinder and manual valveCoolant equipmentVice with fast clamping leverRoller table 2000 mm with manual gauge3 pcs. spare bandsOperating manual with EC conformity declarationOPTIONS:Further roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:htt ...

dimensions of saw-band: 5.330 x 41 x 1,3 mmcapacity 90 degrees: round: 460 mmcapacity 90 degrees: square: 460 mmcapacity 90 degrees: flat: 440 x 600 mmCutting area at 45 degrees left: round: 445 mm: 410 mmCutting area at 60 degrees left: round: 295 mmCutting range at 60 degrees left: square: 295 mmtable height: 890 mmcutting speed: 25 - 80 m/mintotal power requirement: 3,75 kWmachine weight ab.: 1.500 kgdimensions: 2810 x 1135 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 135 mmcapacity 90 degrees: flat: 280 x 70 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 45 degrees: flat: 210 x 55 mmcapacity 45 degrees: square: 105 x 105 mmturning speeds: max. 3000 U/minsaw-blade dia.: 400 x 3,2 x 40 mmmotor: 400 Volttotal power requirement: 4,0 kWweight: 650 kgrange L-W-H: 910 x 1200 x 1700 mmFurnishing:- Miter circular saw for light metal & plastic profiles- Precise and accident-free work by cutting from below- Quick setting for miter cuts- Workpiece clamping with adjustable vice and pressure piece- pneumatic tool clamping- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mmsaw band length: 4000 x 27 x 0,9 mmtable height: -- mmcutting width: 300 mmband speed: 20 - 100 m/minload centre: 290 mmrotary disc high: 290 x 300 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 280 x 240 mmheight of the workpiece: 1800 x 1900 x 1750 mmweight of the machine ca.: 2200 kg- Fully automatic electro-hydraulic band saw- electric feed unit - max. feed 520 mm- front control panel- electro-hydraulic material clamping- semi-automatic & automatic mode selectable- Miter cuts - Automatic operation up to 45° right- Miter cuts - Semi-automatic operation up to 60° right- stepless adjustment of the saw blade speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 12200 €: 234.24 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with encoder and NC controlblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 30 mmcapacity 90 degrees: round: 215 mmcapacity 90 degrees: square: 195 x 195 mmcapacity 90 degrees: flat: 140 x 395 mmcapacity 45 degrees: round: 170 mmcapacity 45 degrees: square: 170 x 170 mmcapacity 45 degrees: flat: 100 x 175 mmturning speeds: 2800 U/mintotal power requirement: 3.0 kWweight of the machine ca.: 310 kgrange L-W-H: 1077 x 1214 x 1558 mmFeatures:- Semi-automatic high-performance circular saw (underfloor) For cuts from 0° to 180° right and left In aluminum and light metal alloys With rising saw blade With extremely large cutting range (saw blade diameter 600 mm) Digital display for angle adjustment from 0° to 180°- Manually opening safety cover- Hydro-pneumatic saw blade feed (via two-hand operation)- 2 pneumatic vertical vices with quick adjustment- Heavy-duty cast iron construction ensures vibration-free .. operation and maximum precision- ...

roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Unique mitering range left/right up to 30° acute angle- Mitering adjustment via lockable detent every 15°- Adjustable saw blade for optimum cutting angle- Hydraulic clamping device on both sides- Electric blade breakage monitoring- Smooth-running saw carriage via preloaded recirculating ball bearings- Additional table 450 x 450- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 mmcutting width: 280 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: flat: 280 x 200 mmcapacity 90 degrees: square: 230 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: flat: 180 x 180 mmcapacity 45 degrees: square: 180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: flat: 110 x 110 mmcapacity 60 degrees: square: 110 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,4 tPowerful miter band saw for cuts from 0 ° to 60 ° left-CCS (CutControlSystem) for automatic cutting. (Stepless regulation of theFeed and switch-off at the end of the cut)Description:-Manual cutting cycle-AUTOMATIC CUT: (via selector switch) with stepless settings of theLowering speed and adjustment of the cutting pressure via compensating spring-Stable, torsion-resistant and low-vibration saw frame made of cast steel-Vice wi ...

cutting diameter: Ø 340 / 340290 mmband length: 600 52 2,5 mmcutting lenght max.: x 600 mmtotal power requirement: 6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,52,51,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 300 mmthroat: 450 mmtable height: 480 mmsaw band length: 3350 mmwidth of saw-band: 10 mmtotal power requirement: 2,2 kWweight of the machine ca.: 520 Kgdimensions of the machine ca.: 1,00 x 0,70 x 1,85 mSaw for body parts made of sheet metal, plastic etcgood accessibility of the saw blade, guided freehand.Cutting speed infinitely variable up to 1000 m/minTape welding device IDEAL BS00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mmMotor output: 1,2 kW: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 36 + 72 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmcapacity 90 degrees: flat: 245 x 150 mmcapacity 90 degrees: square: 200 x 200 mmcapacity 45 degrees: flat: 160 x 140 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: square: 140 x 140 mmcapacity 60 degrees: flat: 110 x 80 mmcapacity 60 degrees: square: 90 x 90 mmcapacity 60 degrees: round: 90 mmvice: 245 mmturning speed range:: 46/92 m/minsaw band length: 2450 x 27 x 0,9 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 1.530 x 900 x 1.720 mmEquipment:- compact / robust manual band saw- with one-sided miter device up to 60° left- hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut- 2x saw band speeds- saw band guide made of hard metal plates- manual vice with quick lock- machine base with- coolant device- manual saw band tension (star grip at the front)- 1x angle  ...

cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: - mmthroat: 1000 mmworkpiece height: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 1 x 2 mNo. 4428Horizontal band saw SAMUR S-1000 VCutting height 350 mmCutting speed 20-800 mmBlade length : 4,550 mm.Blade width : 4 to 15 mm.Infinitely variable cutting speed : 23-711 m / minElektromot r380 VTable dimensions: 610 x 610 mm Table extension leftWelding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2910 x 27 x 0,9 mmcapacity 90 degrees: round: 240 mmcapacity 90 degrees: flat: 310 x 240 mm: 200 mm: 200 x 200 mm: 200 mm: 200 x 200 mm: 140 mm: 200 x 140 mmrest piece length: 60 mmwork height max.: 900 mmdimensions: 800 x 1750 x 1500 mmweight of the machine ca.: 470 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min: 285 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 230 mmcapacity 90 degrees: flat: 280x200 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: square: 180 mmcapacity 45 degrees: flat: 180x180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 110x110 mmdimensions of saw-band: 2950 x 27 x 0,9 mmoutput: 1,5 / 1,8 kWWeight: 435 kgdimensions: 1700x1000x1840 mmSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts - vise opensThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 €: 1018.71 €: Doppelsäulenführung : 7000x41x1,3 mm: 15 - 120 m/min: 560 mm: 540 mm: 810 x 530 mm: rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm: 1.1 kW: 4 kW: 0.12 kW: 3850 mm: 1700 mm: 2450 mm: 3400 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional avai ...

capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 350 mmdimensions of saw-band: 4640x34,1,1 mm: 355 mmsawband speed: 15-115 m/minweight of the machine ca.: 2800 kgdimensions of the machine ca.: 3050x2190x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 16700 €: 320.64 €: Schwenkrahmen : 4800x34x1,1 mm: 15 - 120 m/min: 360 mm: 360 mm: 510x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 220 : rund 280 mm, quadrat 260 : 860 mm: 0.37 kW: 3 kW: 0.12 kW: 2650 mm: 1210 mm: 1870 mm: 1450 kgHydraulic viceInverter for contious variable band speedContinuously adjustable saw arm lowering speedHydromechanical blade tension can be read via pressure gaugeControl panelChip brushCoolant equipmentOperating instructions in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 32000 €: 611.2 €: Doppelsäulenführung : 5000 x 34 x 1,1 mm mm: 20 - 120 m/min: 330 mm: 330 mm: 350 x 330 mm: 845 mm: 1.1 kW: 3 kW: 0.12 kW: 2815 mm: 1935 mm: 1855 mm: 2560 kgServo feed with 700 mm strokeCutting length up to 9,999 mm (multiple feeds)Omron touchscreen, 50 different cutting lengths and 30 programs can be savedLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceSensitive pressureInverter for stepless blade speedChip brushOptical height adjustmentChip conveyorOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 €: 1 : 300 mm: 300 x (2)2,5 x 32 mm: 33/66 U/Min: 45 °: 45 °: rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm: 1050 mm: 990 mm: 135 kgdemo machine / mint conditionnet pricevice with quick clamping device and additional clapming strip for reduced cuttinag burrreduction gear and clutch to save the gear and sawing bladescoolant equipmentsaw blade protectionmaterial gaugepedestal1 saw bladeoperating manual in German or EnglishBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 €: 1169.91 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 670x540 mm: rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm: 2.2 kW: 4 kW: 0.12 kW: 3100 mm: 2350 mm: 2150 mm: 3800 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWvice: 340 mmweight: 1240 kgdimensions: 2020x2040x1740 mmElectro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - repeatable to ...