spawarki używane na sprzedaż (1,730)

turning speeds: 0,7-9,0 U/minTorque: 2,5-10 Nmtable load capacity - central/maximum: 50 kgwelding current: 400 Avoltage: 230 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1860 m³/h: Pressung 2.900 Pa: 1,1 kWfilter surface area: 10 m²: 72 dB(A): 400/50 V/Hz: 665 x 1100 x 1495 mm: 200 kg- Hose arm 3 m, joints inside- Filter cartridge: dust class M- Pre-filter: baffle plate- Current type: 3Ph+N+PEThe filter system---------------------------------------The mobile filter system of the Cartmaster IFA type is thanks to the automaticCleaning particularly suitable for welding work with unalloyed andalloyed steels, galvanized material and aluminum with heavy smoke development.It corresponds to the safety requirements for devicesWelding fume class W3 (high-alloy steels with alloy components > 30%Nickel-based alloy).If used as intended, the system can be used for theRecirculation mode used because the requirements for theExceptions according to TRGS 560 are fulfilled. That specialdeveloped, dirt-dependent cleaning system ensures a goodcleaning behavior of the fil ...

Wyposażony w otwory kratownicowe w górnych i bocznych belkach, Ø 30 mm, grubość górnej części około 20 mm, w tym różne zaciski, ograniczniki, sworznie i akcesoria zaciskowe. Auction-ID: A1-48474-100

- Wieloprocesowe urządzenia do spawania dla procesów MIG/MAG, TIG oraz elektrod drążkowych (MMA). - Zasilacz trójfazowy 400 V. - Maksymalny prąd spawania: 500 A. - Czynnik napędowy: 500 A przy 40%, 410 A przy 60% i 320 A przy 100%. - Podajnik przewodów HELVI TH4W. - Jednostka chłodnicza. - Sprzęt zamontowany na wózku na kółkach. - Warunki eksploatacji tego elementu: niekontrolowane. Auction-ID: A7-48839-62

table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48474-80

table diameter: 340 mmtable load: 290 horizontal kgtable load capacity: 190 vertikal kgturning speeds: 0.6 - 6.0 U/minspindle bore: 60.0 mmswivelling range: 0 - 90.0 Gradweight of the machine ca.: 62.0 kgdimensions of the machine ca.: 380 x 340 x 425 mmFurnishing:- The table can be tilted and clamped at an angle of 0 to 90- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time.- The turntable has a 60 mm hollow shaft.- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- Operating instructions in GermanFunctions of the COM 1000 ...

table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided 750 version with scale- Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution o ...

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated power ( 50% ED ) : 50 kVAContinuous power : 35.4 kVAMaximum short circuit power : 163 kVAHigh welding power : 130 kVAArm distance min. / max. : 60 / 230 mmElectrode arm Ø : 45 mmElectrode holder Ø : 25 mmOutreach : 610 mmMachine weight: approx. 285 kgDimensions : 1200 x 700 x 1450 mmincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 2000 mmtable height: 200 mmbore: 28 mmweight: 1299 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 13 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1 tswivelling range: 0-135 Gradexcentricity: 200 mmtable turning speeds: 0,12 - 1,2 U/minTorque: 2000 N/mtotal power requirement: 0,75 kWdimensions of the machine ca.: 1,5 x 1,020 x 0,9 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading and trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kgProduct description:Siegmund retro offer incl. accessories:>- high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)Accessories:- 6 x Professional screw clamp, nitrided- 12 x quick-release bolts without groove, double burnished- 8 x universal fence 225 L nitrided- 2 x stop and clamping bracket 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread nitrided - Hexagon socket wrench size 6 - Brush Ø 30 with protective cap - CleanBasic 1 liter in spray bottle - Anti-stick 1 l ...

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 726 kgThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Plasma nitrided version Professional 750 with scale- Including 8x basic equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17.9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a lightweight, handy plasma cutting system with high cuttingcutting performance and top cutting quality. Its low weight and easy handlinghandling make it the ideal candidate for trade, workshop and industry.industry. Cuts carbon steel, stainless steel, aluminum, copper ...Features- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch for activating the air flow to set the test air pressure. without having to trigger the burner.- Powerful compact unit- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. ...

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 843 kgSpecifications- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Holes in 100×100 mm grid pattern- Rounded corners, edges and holes- Side panel height 200 mm- Hole spacing on side panel: 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 42 kVAcontact pressure capacity: 600 kpweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 544 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.