maszyny do produkcji okien używane na sprzedaż (159)

Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindlesMachine will be cleaned and completely checked before delivery--------------------------------------------Technical data summary(please enquire about any additional accessories included)Item 1: Cross-cut saw-------------------------------------------> Number of tools: 1 pc.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3 kW> Radial adjustment path pneumatically controlled to 8 positions,e.g. for edge rounding from above> Laser aiming light for detecting the saw sectionItem 2: Rounding unit horizontal below-------------------------------------------> Position: horizontal below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9,000 rpm> Max. tool flight circle: 130 mm> ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles-----------------------------------------Machine will be cleaned and completely checked before deliveryTechnical data summary(please enquire about any additional accessories included)Item 1: Cross-cut saw---------------------------> Electronic cross-cut saw, infinitely adjustable horizontally> Number of tools: 1 piece> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3.0 kW> Laser aiming light for detecting the saw section> NC length stop, mounted on slot table includedPositioning of the cross-cut saw integrated in the control system. > Length 3500 mmItem 2: tenoning spindle----------------------------> Number of tools: variable, infinitely variable adjustment NC axis> Tool clamping length: 320 mm> Vertica ...

Number of motors: 1 Stück0: 2500 mmControl: nein Hecht ES 350 single-sided glazing bead saw--------------------------------------Pneumatic pivoting against fixed stops.45º/ 90º/ 135ºwith pneumatic sawblade feedpneumatic tilting via manual tilt stopwith machine base, pneumatic clampingHM sawblade 350 x 3.0/2.2/30 Z 100Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm1.5 m touch stop1.5 m support with support3 m touch stopSupport extension from 1.5 m to 3 m with supportTable inserts grooved for rebated glazing beadsHECHT ASB manual length stop with digital display, 2,500 mmWith dust extraction unit(Technical specifications according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2550 mmNumber of cylinders: 6 St.loading dimensions L x W x H: 4500x950x2900 mmHess Speedy frame press--------------------------------------will be checkedInsertion dimension / pressing length max. 3,500 mmInsertion dimension / pressing height max. 2,550 mmSliding carriage for width adjustment locking in 50 mmDouble hole grid systemElectric height adjustment of the long-stroke cylinders (hydraulic)Insertion height of the abutment plates can be preselected in 4 positions3 vertical printing cylinders stroke 1000 mmPressure force per cylinder 2000 kN / 20000 N3 horizontal printing cylinders stroke 80 mmPressure force per cylinder 1250 kN / 12500 NPrinting plate depth 100 mm width 140 mmGrid for cylinder fixation/rear bearing 50 mmMedium pressure beam with shut-off valveFinal pressure switch-off and pressure controlControl and pressing process in touch b ...

Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling-----------------------------------------Optionally available (at additional cost):- Weinig Univar 6 Rebating Machine (Price upon request!)- Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request)Manufacturers Technical Description:-----------------------------------------Item 1: Weinig Unicontrol 11 Window System-----------------------------------------Includes existing tooling sets:- IV 67 (Wood and Wood-Aluminum)- IV 77 (Wood and Wood-Aluminum)- IV 90 (Wood)Cross-cut Saw--------------------------------------------------------------With laser alignment light, motor power: 3 kW, spindle diameter: 40 mm,electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting cir ...

Working width: 3648 mmWorking height: 2485 mmNumber of cylinders: 6 St.Maweg Euronova Quickomat frame press----------------------------with automatic measurement adjustment.Cylinder max. opened (maximum working dimensions)W 3,648mm x H 2,485mmTotal length: 4,720mm + 400mm control unitTotal height: 3,550 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: 4 StControl: Siemens Tool changer: 1 PosPlant Consists of 4 MachinesSoraluce FR 9000ISoraluce RR 9000IISoraluce FP 8000Soraluce PM 6000Workpiece Setup StationsReplacement PalletsAutomatic Tool Supply System (WBG)Automatic Pallet SystemPallet Storage RackThe technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively.About UsMore than 400 of our own machines in stockOver 15,000 m² of warehouse space, 70-ton crane capacityMore than 10,000 accessories for your workshopIf you want to sell machines, production lines, or your business,please contact us.Further offers can be found on our website.Viewings are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...

saw blade diameter: 370 mmcutting range round: 115 mmcutting range square: 105 mmcutting range flat: 70 x 240 mmcutting length min.: 730 mmcutting lenght max.: 4000 mmsaw blade turning speeds: 1250 / 2500 U/mintable rotating: 180 °stroke: 120 mmfeed stepless: 0 - 500 mm/mincoolant: capacity 45 degrees: square: 95 mmcapacity 45 degrees: flat: 50 x 200 mmcutting speed: 1250 / 2500 m/minweight of the machine ca.: 1,1 tdimensions of the machine ca.: 5,00 x 1,30 x 2,00 mDouble Mitre Saw for aluminiumconsits of two SKL 370 Circular Sawson common rails, one saw fixed one saw movable.- Serial No.: 28232 / 28233- pneunatic clamping of workpiece- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

height of profile: 60 mm: 60 weight of the machine ca.: 188 kgdimensions of the machine ca.: 0,85 x 0,45 x 1,25 mfoot switch: - Fabr.-No.: 292539- pneumatic clamping headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 350 mmweight of the machine ca.: 50 KGtool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Expert Eda450 Size of table plate: 450 mmweight of the machine ca.: 380 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 0Number of milling agregates: 2 St.Spindle diameter: 40,50 mmItem 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profilesFor sale on behalf of a customer-------------------------------------------------------Manufac turers Technical Description:Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine---------------------------------Compact, heavy-duty automatic window machine featuring a cast-iron construction,consisting of:Top-mounted cross-cut saw with 12-position turret stop system,Positive-guided saw guard for accident preventionTenoning spindle: 40 mm diameter x 252 mm length, 2-step stroke mechanism for3 tool positions (stroke height: 83 mm), Motor: 7.5 kWSliding t ...

Tenoning spindle: 2 Stk.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set-----------------------------------------Optionally available (at an additional cost):IV 68 Wood, Wood/AluminumIV 78 Wood, Wood/AluminumIV 68 Entrance DoorsManufacturers Technical Description:-----------------------------------------Item 1: Weinig Unicontrol 10 NC Window System-----------------------------------------Cross-cut Saw--------------------------------------------------------------with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm,spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mmAxial adjustment: 150 mm via NC axisRadial adjustment: pneumatic, to 8 positions for top edge roundingHorizontal bottom rounding unit------------- ...

Length: 5000 mmWidth: 100 mmHeight: 2800 mmYear: 2011 0Range+Heine coating systemfor coating individual wooden window components and framesfor sale on behalf of a client-----------------------------------------------------------Manuf acturer’s technical description:Part dimensions: Length: 5,000 mmHeight: 2,800 mmWidth: max. 100 mmCoating system:Intended use of material from the relevant coating manufacturer with alow solvent content (VOC value), water-based and non-flammable.Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift(without forced drying)Process (1 cycle is run twice):- Flooding- Drying- Checking and applying joint sealant- Spraying- Drying-------------- --------------------------Item 1 Conveyor technology1 Power + Free circular conveyorLayout as per drawing 11-138-010aEssentially comprising:3 drives with gear motors for the main chains withfrequency-contro ...

Working width: 3500 mmWorking height: 2500 mm# 6913 Hess Quickstep frame press---------------------------------Sold on behalf of the customer in its current conditionTechnical data summary(please enquire about any additional accessories included)--------------------------------------General---------------- -----------------------Working width: 3500 mmWorking height: 2500 mmFeatures:--------------------------------------> hydraulic: yes> Number of vertical press cylinders: 3> Number of horizontal press cylinders: 2> Vertical adjustment type: electric (long stroke cylinder)> Horizontal adjustment type: electric> 1 medium pressure barAccording to the customer,the control system has been renewed and the hydraulic pump with connections has been renewed(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of  ...

0: 3350 mmWorking height: bei 90° = 180 mm0: 45°/90°/45° 0Cutting height at 45°: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 315 mm0: 45°/90°/45° 0weight: 2050 kgCutting height at 45°: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 290 mm0: 45°/90°/45° 0weight: 1800 kgCutting height at 45°: 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Szerokość cięcia: 90: 410 / 45:290 mmWysokość cięcia: 170 mmWysokość cięcia 45: 115 mmŚrednica ostrza piły: 420 mmWaga maszyny ab.: 150 kgTarcza piły: 40 mmPrędkości toczenia tarczy: 3350 U/minDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

Szerokość cięcia: 90: 410 / 45:290 mmWysokość cięcia: 170 mmWysokość cięcia 45: 115 mmŚrednica ostrza piły: 420 mmWaga maszyny ab.: 150 kgTarcza piły: 40 mmPrędkości toczenia tarczy: 3350 U/minDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

Length: mmWidth: mmHeight: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 660x460x1200 mmWeight: 49 kgTotal power requirement: 0,85 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja_yes Szerokość roboczą: - mm0: - 0Stag montażowy do ram striffler--------------------------------------------------------- z automatycznym śrubokrętem i podajnikiem śrub - Stojak montażowy - Dziurkacz do opraw rotologicznych (specyfikacja techniczna według producenta, bez gwarancji!)Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mm# 6726 Weinig Unicontrol 12 CNC--------------------------------------------------------Sale on behalf of a customer. Machine connected and ready for demonstration.crosscut saw--------------------------------------------------------Crosscut saw electronically, horizontally infinitely adjustableNumber of tools: 1 pc.Spindle speed: 3000-6000 rpmSpindle diameter: 40mmTool diameter max.: 400 mmMotor power: 3 kWLaser guide light to identify the saw section rounding aggregate--------------------------------------------------------Posit ion: horizontally belowMotor power: 1 kWSpindle diameter: 20mmSpindle speed: 9000 rpmTool flight circle max.: 130 mmelectronic length stop, length: 3500 mm--------------------------------------------------------1. tenoning Spindle------------------------------------ ...

Table dimensions: 1000,400 mmpneumatic clamping: 4 St.moveable: ja For fast compression of Minizinken- or Softline compoundsespecially for larger cross-sections- Independent of the angle- Especially suitable for arched manufacturing- Table size 1000 x 400 mm- Pneumatic connection 10 bar- Air consumption 1 cdm / stroke- 4 clamping cylinders for workpiece clamping- Pairs switchable- Right half of the table supported on hardened shafts through ball linearbearings- 2 pressure cylinder for linear table displacement, separately switchable- Weight: 200 kg- CE - execution(Technical details according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4150x1200x1650 mmWeight: 450 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 80-120 mmWorking height from to: 30-80 mm: 1200-1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 3 St.Number of tools: 8 St.Spindle diameter: 50 mmDimensions (L/W/H): 4250x1850x2300 mm! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs.> length of spindle: 120 mm> number of revolutions: 6000 rpm> spindle diameter: 50 mm> tool diameter max.: 232 mm> engine: 11 kW2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm> spindle stroke vertical: variabel, CNC > number of revolut ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mm1 used Weinig Unicontrol 6 window system----------------------------------------------Manufacturers description:For the production of individual parts, elements, and small series.Spindle arrangement:One cross-cutting saw, one single-sided tenoning and slotting spindle,one right-hand profiling spindle, one tenoning and slotting spindle, andprofiling spindle suitable for holding multiple tools stacked on top of eachother, with pneumatic spindle movement.Slotting table with motorized table movement and automatictransfer to the continuous, chainless rubber roller feed of the profiling unit.Feed height adjustment manually.Workpiece clamping via 2 pneumatic clamping cylinders.Length stop with scale and magnifying glass for frame or sash externaldimensions.Tool positions (longitudinal and transverse machining)contro ...

Dimensions (L/W/H): 7600x1400x1800 mmWeight: 2950 kgTotal power requirement: 9,15 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.