inne maszyny do obróbki metalu używane na sprzedaż (11,171)

with approx. 95 HSK-63 tool holders

Included: Pallet and accessories

Gauge block set / Parallel gauge blocks – 87 pieces, quality class 1, in wooden boxcondition • Used • Optically good, neat condition • Gauge blocks clean without recognizable damage • Calibration sticker available (visual inspection) • No current calibration certificate available • No current metrological test carried out • Type: Gage Blocks • Quantity: 87 pieces • Quality class: Grade 1 • Reference temperature: 20 °C • Material: Steel (ground, lapped) • Measuring range: 1 mm – 100 mm • Pitch / gradation: • Fine grading in the lower range • Supplementary final dimensions up to 100 mm • Serial number: 057414 • Standard: Industry-standard final dimension (comparable to DIN / ISO)

"Automatic wire feeder AWF2 from Seibu for use on wire EDM machines. The module is housed in a solid metal housing and comes in an original wooden box. Connections, controls and mechanical components are completely present on the outside. A functional test under machine was not carried out. Condition: • Used • Housing with slight signs of wear • Plug-in connection mechanically undamagedScope of delivery: • Automatic wire feeder Seibu AWF2 • Original wooden cassette • Manufacturer: Seibu • Model: AWF2 • Device type: Automatic wire feeder (Wire Feeder) • Application: Wire EDM • Connections: Multi-pin circular connector • Installation position: Marking "UP / DOWN" available • Country of manufacture: Japan"

Compressed air connection 6 bar

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5)

Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic double clamping device · Pneumatic vertical clamping device · Integrated coolant spraying device MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m

Consisting of Table 2x Vibration metering, type VD4 2x Wenrdel conveyor type BF 40-L 12 4x linea conveyor HLF 25-M-12

Machine number: 2-0586Compressive force: 28 kNStroke: 60Table dimensions: approx. 200 x 150 mmincl. installed punching tool

"Permanent magnetic clamping plate Narex PERMAG 160/400. The magnetic clamping plate has a switch via lateral lever (on/off). The clamping surface is designed with a longitudinal pole pitch and is suitable for clamping ferromagnetic workpieces. Product: Permanent magnetic clamping plateManufacturer: NarexType / Designation: PERMAG 150/400Origin: Made in Czechoslovakia • Clamping surface: 400 × 160 mm • Height: approx. 75 mm"

3m roller conveyor with manual length stop. Working length 3000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Machine weight approx. 0.050 t Dimensions L x W x H 3.1 x 0.45 x 0.6 m Condition: never used / new (5)

Incl. assortment of hoses

Attention: for all other welding data, see photographed nameplateincl. hose package

Column drilling machine with - Left/right rotation - Machine light - Coolant - Emergency stop facility Drilling capacity in steel 50 mm Projection 365 mm Drilling stroke 230 mm Spindle diameter 60 mm Spindle Holder MK 4 Spindle speeds: 54 - 1032 rpm Number of speeds: 9 levels Table clamping area 620 x 520 mm Total power requirement 3.5 kW Machine weight approx. 0.9 t Space requirements approx. 1.2 x 0.8 x 2.45 m Condition: unchecked (6)

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

max. load capacity: 750 kgESP: 550 mmcapacity: 0.3 cbm

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

consisting of stamps in different designs and sizes

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

"Tool batch consisting of four tapping chucks, a drill chuck and various accessories (including clamping sleeves / inserts). • 4 × tapping chuck • 2 × drill chuck • Accessories: Clamping sleeves / inserts / adapters • Storage: wooden boxes and plastic boxes • Tool type: Tapping chuck, drill chuck • Holders: square / cylindrical (mixed)"

Without pallet truck

Used and untested

Technical data Manufacturer: e.g. RAL, ALEXIT Model: including RAL K5 Classic Configuration Scope: Several colour fans (including RAL K5 Classic), various colour sample cards, sample plates, sample cases (aluminium), plastic storage boxes. Special features: Extensive color sample collection for industrial coatings and paintings.

Separator Cutting Wheel 355mm Speed 3800 230Volt see pictures

Pressure 100 t Stroke 220 mm Clear width between uprights 1190 mm Installation height 700 mm Cylinder diameter 190 mm Piston diameter 120 mm Table surface 1600 x 800 mm Machine weight approx. 1.3 t Dimensions approx. 1.9 x 1.4 x 2.0 m

"Hardness comparison blocks (HRC) for the inspection, adjustment and control of hardness testers (Rockwell C). The blocks are individually marked and are each in protective packaging or cases. In some cases, calibration certificates / certificates are included (e.g. MPA NRW, DKD / UKAS). Item: Hardness Reference Blocks / Hardness Test Reference BlocksHardness Scale: Rockwell C (HRC)Quantity: 3 piecesCondition: used, very good conditionCertificates: available (MPA NRW / DKD / UKAS, see documents & photos)Hardness values of the individual blocks: • 60.86 HRC • 61.4 HRC • 60.24 HRC"

Lot with solid drills (solid carbide / carbide) and WSP solid drills in HSK-A63 mounts. The set includes various manufacturers such as Walter, Sandvik Coromant, WIDIA, Jongen, DC Swiss.  Tool Type: Solid Drill / Interchangeable Insert Solid Drill Holder: HSK-A63Diameter Range: Ø 16–50 mm,Cooling: TL Drill Partly with Internal CoolingMaterials:Solid Carbide (Solid Carbide)HM-Tipped Indexable Insert DrillsHSS-E / HSS-E-PM Total weight: approx. 30 kg

Wheel diameter: 800 mmTable dimensions: 370 x 230 mm