inne maszyny do obróbki metalu używane na sprzedaż (11,171)

Mixed lot of compression springs – sorted stock   The pictured cabinet is not part of the offer.Extensive stock of cylindrical compression springs, systematically stored in approx. 115 storage containers. The springs are clearly labeled according to their dimensions (wire diameter × outer diameter × free length). These are industrial and toolmaking springs from professional use, not an unsorted mixed item.The labels follow the usual technical scheme, e.g.: 0.5 × 3.7 × 23.5 mm, 1.0 × 10 × 30 mm, 1.25 × 8.5 × 65 mm, 2.0 × 12 × 80 mm.Quantity / Scope:• approx. 115 storage containers• Quantities per dimension not counted• Sale only as a complete lot • Type: compression springs, cylindrical• Wire diameter: approx. 0.25 mm to 2.0 mm• Outer diameter: approx. 3.5 mm to 12 mm• Free length: approx. 8 mm to >110 mm• Material: not marked (typical spring steel, no ...

Without clamping devices andtechnical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-30 PLC Year of Make: 1993 Machine Type: Hydraulic trimming press Nominal force: 300 kN Retraction force: 42 kN Max. stroke: 500 mm Installation height: 800 mm Clamping area: 800 x 600 mm T-slots: 18 mm Motor power: 7.5 kW Connected load: 8 kVA Voltage: 380 / 660 V Frequency: 50 Hz Hydraulic pressure: up to 200 bar Hydraulic pump: E-A10VSO45DRL/30R-PPA12 Hydraulic Medium: HFC Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration PLC control Vertical stud design Suitable for die casting deburring processes Documentation available Conditionused d Pads, only the press

Without gas cylinders

Rollable Coil weight max.: 1000 kg Ø max 1000 mm Ø min 290 mm / 540 mm

2 servo motors technical data see pictures Condition: unchecked (6)

x-travel:3.000 mmy-travel:700 mmz-travel:1.200 mmSpindle RPM:2.500 1/mintool taper:SK50

Hydraulic pressure 700 bar with hand pump

"Mitutoyo internal measuring screw for the measuring range 50–75 mm.The measuring device is located in the original plastic case with foam insert. • Used • Measuring surfaces optically clean • Spindle runs smoothly • Scale easy to read • Case with age- and use-related traces • No calibration or measurement test carried out⸻Scope of delivery • Internal measuring screw Mitutoyo 50–75 mm • Original plastic case • Manufacturer: Mitutoyo • Type / Designation: IMP-75 • Order / Code No.: 145-187 • Measuring range: 50–75 mm • Reading: Analog • Pitch: 0.01 mm • Design: Internal measuring screw with measuring attachments • Made in Japan"

PLC integrated

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

Partial table with: - Round and swivel axis - Axles are moved by handwheel - Both axes can be clamped Table diameter 450 mm Swivel range 90 degrees Table height 450 mm Number of T-slots 8 pcs. Machine weight approx. 140 kg Dimensions L x W x H 0.9 x 0.8 x 0.6 m

turning diameter over bed:1000 mmturning diameter over slide rest:750 mmturning length:3000 mmweight of the machine ca.:12 tdimensions of the machine ca.:6x2,5x1,8 mspindle bore:110 mmturning speed range:900 U/minYear:1986 Equipment:- Coolant device- 1 static steady rest- 1 rotating steady rest- Faceplate 1.000 mm- Digital display- Rapid traverse

Drawer cabinet with contents See pictures

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 365 U/minmilling motor:37 kWram head dimension:240 x 240 mmmax. ram stroke:1250 mmtotal power requirement:133 kVAweight of the machine ca.:50 tdimensions of the machine ca.:11 x 5 x 6,4 mMachine was overhauled in 2008 by OEMNew control CNC SIEMENS 840 Dautomatic tool changer 72-pcsC-axis with driven toolsAngle-, straight tool holders with CAPTO holder Coolant deviceChipconveyour

Hydraulic Machine Vise Jaw width 150mm Jaw height 50mm Clamping range 300mm see pictures Condition: unchecked (6)

Universal tool milling machine - Digital display - Horiz. Milling device - Coolant system - Vise - Instruction manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table area 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m Condition: unchecked (6)

x-travel:6.300 mmy-travel:2.000 mmz-travel:2.700 mmtool taper:ISO 50 surface area:7.000 x 3.000 mmturning speed range:60 - 4.000 U/minpower capacity:22/30 kWfeeds:0 - 10.000 mm/minrapid traverse:20.000 mm/minTool changer:80 max. workpiece weight:8.000 kgPlate clamping area 7,000 x 3,000 mmCNC rotary table 1,500 mmOrthogonal milling headDeep drilling unitIKZPaper belt filterMeasuring probe

without pallets

x-travel:1660 mmy-travel:760 mmz-travel:660 mmweight of the machine ca.:8700 tdimensions of the machine ca.:4.320 x 3.380 mmdistance spindlenose - table min./max.:808 mmdistance work spindle /surface of the table:155 - 815 mmMachine height:2850 mmfloor space required (w/o switchgear cabinet):4.320 x 3.380 mmspindle motor:11 (10 Minuten) /7,5 (30 Minuten)/ 5,5 (Dauerbetrieb) kWtool taper:SK 40 Spindle RPM:40 - 7.000 (Standard ) / 40 - 10.000 ( Option ) 1/minsurface area:2.000 x 760 mmmax. table load:1.000 kgfeeds X-axis:1 - 5.000 mm/minrapid traverse X-axis:24.000 m/minrapid traverse Y-axis:24.000 feeds Y-axis:1 - 5.000 mm/minfeeds Z-axis:1 - 5.000 mm/minrapid traverse Z-axis:20.000 m/min

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production

turning diameter:145 mmturning length:210 mmtotal power requirement:40 kWswing diameter:145 mmSpindle bore sp. 1:56 mm Spindle bore sp. 2:56 mm swing diameter over face slide:145 mmgreates pass round over bed:145 mmRPM Main Spindle:7.000 1/minnumber of workpiece supports:12 Shank diameter:25 mmC-axis RPM:2.000 1/minChuck diameter spindle 1:140 mmChuck diameter Spindle 2:140 mmNumber of tools:12 fach St.Tool bore:VDI 25 Shank diameter:25 mmweight of the machine ca.:5.300 kgdimensions of the machine ca.:5.000 x 4.100 x 2.050 mmSlide path flat: X1, X2, X3: 220mm, 120mm ( 145mm )Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mmVertical slide travel Y1: +/- 30mmLongitudinal spindle travel Z3: 380mmClamping tube inner draw tube 46mm diameterSpeed range main drive 1+2 up to 7,000 rpmSpeed of driven tools up to 6,000 rpmMain and counter spindle collet chuck1 axial driven tool1 radial to ...

Used and untested

spindle diameter:150 mmx-travel:10000 mmy-travel:2500 mmbore spindle stroke:700 mmSpeed of boring spindles:1,25 - 1250 U/min.ram stroke:700 mmdimension of the ram:340 x 340 mm mmspindle taper ISO:50 rapid traverse:5 m/mintotal power requirement:120 kWweight of the machine ca.:115 tdimensions of the machine ca.:15,1 x 10 x 6,4 mCNC control Siemens 840 Dsl completely modernized 2010FIBRO CNC drilling work table 2500 x 2500 mm50 to. workpiece weightLongitudinal travel 2500 mmAngular milling head 4 x 90°Universal angular milling headPanel area approx. 10000 x 5000 mmChip conveyor and coolant deviceAerostatic guides

Geared motor with sprocket incl. connection forward/back Motor approx. 3 KW see pictures Condition: unchecked (6)

Various sizes and designs, see pictures.

x-travel:635 mmy-travel:510 mmz-travel:460 mmturning speed range:20 - 10.000 U/mintool taper:SK 40 table clamping surface LxW:790 x 560 mmMachine with glass scalesFull safety cabin with sliding doors + interior lightingHeight-adjustable machine shoes 3 pcs.

x-travel:6500/13150 mmy-travel:4000 mmz-travel:1250 mmw-axis:2250 mmtable surface area:5500/12150 x 3000 mmmax. workpiece weight:70.000/105.000 kgram head dimension:480 x 510 mmmilling spindle motor:63 kWmax. torque on the spindle:3300 Nmtool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/minfeed speeds:1 - 24000 mm/minw-axis:1 - 6000 mm/mindistance between columns:3500 mmpassage:3000 mmtotal power requirement:120 kWweight of the machine ca.:245 tdimensions of the machine ca.:29,0 x 7,7 x 8,1 mMachine is in nearly new condition and was completely modernized in 2020!With CNC SIEMENS 840 DAutomatic tool magazine for 153 tool positionsAutomatic milling head magazine for 6 milling headsMachining module ? straight ? straight long ?Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 ...

grinding length:4000 mmgrinding width:1450 mmworkpiece height:1250 mmtotal power requirement:40 kWdimensions of the machine ca.:12,3 x 6 x 4,8 mdistance between columns:1460 mmtable surface area:4000 x 1250 mmmax. workpiece weight:11.000 kgcross rail adjustment:1250 mmMachine is in very good condition for highest precision!With CNC control SIEMENS 840 D1 universal grinding support, 7.5 kW, swivelling grinding spindle ±110°Peripheral grinding wheel dimensions Ø 500 x 60 mmVertical adjustment 350 mm, with dressing device1 peripheral grinding support, 22.5 kWGrinding wheel dimensions Ø 600 x 100 mmVertical adjustment 150 mm, with dressing deviceWith 6 magnetic plates arranged on the tableVarious grinding wheel holders

x-travel:1.100 mmy-travel:900 mmz-travel:1.250 mmtool length:750 mmrapid traverse in x-y-z axis:60 feeding capacity X Axis:17.000 daNfeed capacity Z - max.:17.000 Nspindle taper:SK50 max. workpiece weight:1500 kgrevolutions per minute:10.000 U/minpallet table size:630 x 630 mmtool magazin::165x (bis D=125mm), 21x (bis D=225mm), 8x (bis D=350mm total power requirement:37 kW

bore capacity in steel (diameter):- mmthroat:- mmbore stroke:- mmx-axis:1.800 mmy-axis:1.600 mmz-axis:1.250 mmw-axis:630 mmmax. table load:5.000 kgtable length:1.400 mmtable width:1.600 mmspindle diameter:105 mmspindle turning speed range:3.300 U/minnumbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary tableChip ConveyorOil cooling unit (chiller)Touch probe Renishaw RMP60Upgrades in 2024 and 2025Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZNew linear scales Heidenhain in X and Z axis including cablingretrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axisnew TOS Varnsdorf parts for tool clamping and automatic tool changer armOverhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor)New Siemens hand wheel