inne maszyny do obsługi mechanicznej używane na sprzedaż (5,626)

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: 30 liters -Hydraulic tank: with level and temperature indicator -Return filter: Hydac RF BN/HC 30 BB 10 A 1.0 -Motor mount: Ø 147 mm / bolt circle Ø 163 mm M10 -Individual components: see photos -Dimensions: 495/340/H375 mm -Weight: 13.8 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit-Hydraulic tank: Hydraulic tank for hydraulic unit-Hydraulic tank: with level and temperature indicator-Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6-Individual components: see photos-Dimensions: 490/400/H515 mm-Weight: 25 kg.

Wózek widłowy Linde E16 Evo BJ 2016

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt stainless steel -Width: 600 mm -Length: 6.7 m -Transport dimensions: Ø 320 x 600 mm -Weight: 42.7 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg

V-belt pulley, pulley -V-belt pulley: 5-groove pulley SPC 200/5 with taper bushing -V-belt width: 22 mm -Receiver: Taper bushing manx 3535-65 Ø 65 x 90 mm (can be replaced) -Dimensions: Ø 210 x 135 mm -Weight: 18.1 kg

Pneumatic cylinder, air cylinder, pneumatic plunger, air plunger, standard cylinder, clamping cylinder -Manufacturer: Rexroth, double-acting pneumatic cylinder type 0 822 120 005 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 270/46/H46 mm -Weight: 0.8 kg/pc.

Caster, swivel caster, transport equipment caster, fixed caster, double caster -Manufacturer: Dörner & Helmer, 4 pieces swivel caster double caster with plate and brake -Type: 778310 -Wheel: Ø 50 x 19 mm rubber -Submission/Price: complete -Dimensions each: 110/60/H75 mm -Weight: 0.4 kg/pc.

Solenoid valve, flap valve, electromagnetic valve, solenoid valve Valve manufacturer: Herion, unused -Type: 2323124 -Pressure: 0-10 bar -Connection: 3/4 -Magnet manufacturer: Norgren, type 1310 -Voltage: 230 V 40 - 60 Hz -Quantity: 25 pieces available Price: per piece -Dimensions: 230/125/H100 mm -Weight: 3.2 kg/piece

Na sprzedaż jest oryginalna wyciągarka nośna ROBEL typu 46.50 o nośności 10 t. Profesjonalna, wytrzymała wyciągarka do podnoszenia i opuszczania ciężkich ładunków, szczególnie w budowie torów i kolei. Dane techniczne: Producent: ROBEL Bahnbaumaschinen GmbH Typ: 46,50 Numer seryjny: 46.50-00459 Ref. No.: 800 465 0001 Rok budowy: 2019 Ładowność / SWL: 10 000 kg Maksymalna wysokość nośności: 300 mm Wysokość wykopu: 80 mm Waga: ok. 46 kg Korba bezpieczeństwa z hamulcem naciskowym i składanym uchwytem Solidna konstrukcja z wzmocnioną płytą podstawową Wyprodukowane w Niemczech Oznaczenie CE Wyciągarka jest w dobrym stanie, z typowymi śladami użytkowania i przechowywania. Nadaje się jako profesjonalna wyciągarka do podnośników gąsienicowych oraz do odpowiednich zastosowań ciężkich i nośnych, zgodnie z odpowiedni ...

Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.

A gantry crane in need of repair is offered. Load capacity: 5000kg (formerly 10000kg), Demag wire rope hoist installed, bearing worn out. An on-site inspection is possible.

Working width: approx. 3600mm, load capacity: 2500kg. An on-site inspection is possible.

Bowl diameter: 1200mm, variable loading height: 1800mm-2200mm, suitable for shaft lengths up to 400mm. Inspection by appointment is possible.

Ball valve, ball valve with internal thread -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2 inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg

Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: unicraft, Scissor lift table, flat form lift table type SHT1001G -Load capacity: 1000 kg -Platform: 1140 x 1460 mm -Dimension when retracted: Height 82 mm -Extended dimension: Height 760 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1140/1460/H210 mm -Weight: 341 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg

Two large and two small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 2x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible.

Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: Length: approx. 6,000 mm Width: approx. 2,900 mm Height: approx. 780 mm Workpiece length: max. approx. 4,000 mm Workpiece width: max. approx. 900 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: elastic claw coupling -Hub bore: Ø 55/40 mm -Quantity: 1x coupling available -Dimensions: Ø 128 x 145 mm -Weight: 6.1 kg

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Dimensions: see photos -Dimensions: 270/110/40 mm -Weight: 2.1 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: Coupling half with toothed ring -Hub bore: Ø 35 mm -Dimensions: Ø 79 x 52 mm -Weight: 0.9 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Maedler, elastic jaw coupling -Hub bore: Ø 18/19 mm -Quantity: 1x coupling available -Dimensions: Ø 50 x 60 mm -Weight: 0.2 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic jaw coupling -Type: GS24 CT9327 -Hub bore: Ø 20 mm -Quantity: 1x coupling available -Dimensions: Ø 55 x 77 mm -Weight: 0.4 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt-Body: made of stainless steel-1x conveyor belt speed: 16 m/min-1x conveyor belt speed: 8 m/min-Drive: 0.55 kW-Transport belt: with carrier-Belt width: 695 mm-Length: 4500 mm-Number: 2x conveyor belts available-Price: per piece-Transport dimensions: 4550/1000/H1630 mm-Weight: 450 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, swivel cylinder -Hydraulic cylinder: double-acting, stroke 300 mm -Piston rod: Ø 35 mm -Holes: Ø 25 mm / Spacing: retracted 540 mm -Dimensions: 590/85/H105 mm -Weight: 10 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump -Type: unfortunately no exact designation -Item No.: 122 049 303 -Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg