tokarki używane na sprzedaż (3,074)

weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft

max. workpiece diameter:29 mmmin. workpiece diameter:26 mmworkpiece length:66 mmthe system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mmChanging parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mmTotal length will probably be almost 400 mm possible with a few conversions.Also dependent on tool lengths, machining lengths on the component, etc.Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing the clampi ...

turning diameter:250 mmswing diameter:250 mmturning height:200 mmtotal power requirement:37,7 kWchuck diameter:315 mmspindle speed max.:5500 1/mintravel -x axis:625 mmtravel -y axis:+100/-80 mmtravel -z axis:250 mmworktool system:VDI 30+40 weight of the machine ca.:8 tThe synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm.Typical components are ball cages, ball hubs, gear wheels, sliding sleeves,pump wheels, flanges, synchronizer rings, bearing rings and pivot pins.The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:8,6 tspindle drive motor:11 kW

turning diameter:200 mmturning height:120 mmweight of the machine ca.:18 tAvailable from 01.08.2024

turning diameter:1000 mmswing diameter:1000 mmMachine type: Vertical latheManufacturer: HessappType: DV 62Serial no.: 14.2308Working range of the spindleLargest diameter 1000 mmLargest swing diameter 1000 mmCross slide travelStroke of the vertical slide 900 mmStroke of the horizontal slide 1810 mmTotal travel 2315 mmTurning spindleSpindle head with centering cone according to DIN 55021 A15Spindle diameter in the front bearing 203 mmMain driveVia a controlled asynchronous motor and gear transmissionwith range switching.Spindle speedsSpeed range I: 5 - 350 rpm.Speed range II: 30 - 1000 rpm.Travel speedX/Z axis: 10 m/min.W1 axis: 8 rpmNo C-Axis

faceplate diameter:800 mmpower requirement:110 kWweight of the machine ca.:37.000 / total 52.000 ttransport measurements machine:5,07 x 2,98 x 3,90 mclamping diameter:800 mm:Ø 800 x 720 mmTool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mmpower requirement:80 kWweight of the machine ca.:25 tdimensions of the machine ca.:4,4 x 4,62 mmax. workpiece diameter:2000 mmmax. diameter of face turning:1800 mmtool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

turning diameter:270 -300 mmturning length:710 mmtotal power requirement:43 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:3,16 x 2,15 x 2,15 mThe machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:220 mmturning length:310 mmtotal power requirement:17 kWweight of the machine ca.:3,3 tdimensions of the machine ca.:2,25 x 1,63 x 1940 mgreates pass round over bed:430 mmbore diameter:45 mmcentre distance:687 mmslide travel radial ( X-axis ):160 mmslide travel axial ( Z-axis ):310 mmspindle turning speed range:0-6.300 U/min

turning diameter:220 mmturning length:700 / 665 mmtotal power requirement:17 kWweight of the machine ca.:2,6 tdimensions of the machine ca.:2,63 x 1,98 x 1,94 mgreates pass round over bed:430 mmPart length max.:510 slide travel radial ( X-axis ):160 mmbore diameter:45 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m

turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith live tools:VDI40 Live tooling VDI40with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionChip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system, chip conveyorG300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter: 42/200 mmturning length: 430 mmcontrol: Fanuc 3li-B clamping chuck diameter: 165 mmturret (x-stations): 2x12 travel -y axis: 70 mmrange L-W-H: 2645 x 1645 x 1900 mmtotal power requirement: 11/7,5 kWturning speeds: 6000 U/mingripping station: 42/200 mmload magazine: Breuning IRCO SIMag chip conveyor: Knoll kWcoolant filtering unit: Knoll kWtotal power requirement: 11/7,5 kWweight of the machine ca.: 6250 kgdriven tools: 2 x 12 Machine ON/OFF: 25886 hRunning time: 14452 hfire distinguisher: Kraft & Bauer CNC Turning & Milling machine Miyano ANX 42 SYYThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 20 mmspindle passage: 34 mmturning length: 200 mmturning speeds: 10000 U/minc-axis: 0,001 ° Gradgripping station: 20 turning length: 50 mmturning speeds: 8000 U/minc-axis: 0,001 ° Gradnumber of tools: 9+7+4 =20number of milling stations: 4 control: Mitsubishi Meldas Number of axles: 5+2x C Achse St.chip conveyor: ja/yes KnollNumber of working hours: 5000 htotal power requirement: 3,7 kWweight of the machine ca.: 2.550 kgdimensions of the machine ca.: 2,1 x 1,2 x 1,8 plus FMB mMachine ON/OFF: 79.776 hworking hours: 37.156 hbar loader: FMB Minimag 20 20mm Kanalfire distinguisher: ja/yes parts conveyor: ja/yes Citizen A20-VIIPL CNC swiss type lathe, built in 2011with FMB Minimag 20 loading magazine,In very good condition! Regularly serviced by Citizen.The machine has been operated in 3 shifts, 5 days a week.Several Citizen A20-VIIPL machines are available.Reason for sal ...

total power requirement:40 kWOut of valve production

turning diameter: 390 mmturning length: 1035 mmcontrol: MSD-501 TA II (Fanuc) total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMSD-501 TA II (Fanuc) cnc controlmain spindle: 3-jaw chucksub spindle: 3-jaw chuckC-axisdriven tools12-fold revolverchip conveyorcoolant deviceportal loading device without functionTechnische Daten: / technical detailsUmlaufdurchmesser über Bett / rotary diameter over bed 680 mmUmlaufdurchmesser über Schlitten / rotary diameter over sledge 510 mmDrehdurchmesser / turning diameter 390 mmDrehlänge / turning length 1035 mmX-Achsen Verfahrweg / X-axis travel 235 mmZ-Achsen Verfahrweg / Z-axis travel 1045 mmmax. Drehzahl / max. spindle speed 3500 UpM /rpmAnzahl der Revolverplätze / numbers of tool places 12 max. Stangendurchlass / max. bar diameter 73 mmGewicht ca. / wei ...

turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mmax. swing diameter:250 mmGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:200 mmturning length:600 mmcapacity X-axis:190 mmcapacity Z-axis:555 mmdouble spindle units: spindle distance:800 mmspindle drive:Links (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspindle drive:Rechts (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspeeds of tool:2x12 Werkzeuge: 7/5 KW, 40-4200 U/mindimensions of the machine ca.:5,032 x 3,048 x 2,445 mweight of the machine ca.:6500 KgGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

weight of the machine ca.:9,5 tx-travel:406 mmz-travel:380 mm

swing diameter:400 mmturning height:950-1500 mmTurning length:210 mmx-travel:310 mmz-travel:350 mmspindle drive:48 kWspindle turning speed range:20-3500 U/minweight of the machine ca.:11 tdimensions of the machine ca.:4,5 x 3,5 x 2,7 m

swing diameter:400 mmturning height:950-1500 mmTurning length:210 mmx-travel:310 mmz-travel:350 mmspindle drive:48 kWspindle turning speed range:20-3500 U/minweight of the machine ca.:11 tdimensions of the machine ca.:4,5 x 3,5 x 2,7 m

Auction-ID: A3-46118-11986

średnica obrotu nad podporą 430 mm; średnica toczenia w worku 960 mm; szerokość stołu 450 mm, z 3-szczękowym oklepem Ø 310 mm; z cyfrowym odczytem Sony X-Y; w tym 1x czteroszczękowa wybuchowa Ø 630 mm; (2x) stałe siedzisko i stół z obrotowymi środkami, tuleje wiertła redukcyjnego, adaptery dłut i wiertarki Auction-ID: A1-50859-1

Victor TNS-3 Producent tokarki CNC: Victor (Taichung, Tajwan) Model: TNS-3Rok: 1989Sterowanie numeryczne: Fanuc Series 0-T (OT-C) Wieżyczka narzędziowa3-szczękowa UchwytSilnikgłówny: 15 KMCałkowita moc: 33 kVAZasilacze: 220 V – Trójfazowe – 50/60 HzŁadowanie zapewnia sprzedawca; obowiązują obowiązkowe opłaty za ładowanie. Auction-ID: A1-51946-21

Tokarka CNC Hardinge Talent 8/52Producent: HardingeModel : Talent 8/52Rok: 2003Sterowanie numeryczne: Siemens SinumerikWieżyczka narzędziowa z 3-szczękowym zaciskiem Przenośnik na przeróbki wytłaczonezapewnia sprzedawca; obowiązują obowiązkowe opłaty za załadunek. Auction-ID: A1-51946-19