tokarki używane na sprzedaż (3,068)

Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible.

Ref. -No.: 10673Manufacturer: COLCHESTERType of control: KonventionellStorage location: HalberstadtCountry of origin: EnglandX stroke: 500 mmY stroke: 400 mmZ - stroke: 400 mmFeed rate: 5.000 mm / minTool places: 16 Weight Of The Machine Ca.: 3.000 tFurther information:The machine is offered including all available accessories and technical documentation.The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

faceplate diameter: 820 mmswing diameter: 1100 mmturning height: 850 mmturning diameter: 950 mmcontrol: Fanuc 0i-TF control numbers of positions in the tool changer: 16 spindle motor: 30 / 22 kWspindle turning speed range: 800 U/minLive Tools: speeds of tool: 3000 U/mintotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mVertical CNC lathe- CNC control Fanuc 0i-TF control- NC rotary table (800 mm) 3-JAW SEOAM (CAS-32) HYDRAULIC CHUCK- Tool turret 12-fold BMT 65- Tool Changer 16-fold- live tool holders (3)- Coolant system- Tool Presetter- Chip ConveyorThe machine has only approx. 1.100 H operating hours.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Układ kołder - Kołdry - Ogon wiertły

Key data: 140 mm, 250 mm, 3000 U/min

Dobrze zachowana tokarka precyzyjna z rozbudowanym wyposażeniem

Mazak Quick 8 tokarka z podajnikiem prętowym

Ref. -No.: 10716Manufacturer: DMG MORIYear of construction: 2015Type of control: CNCControl: Siemens 840DStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 004xxxxxxx Tool holder type: VDI 30 X stroke: 260 mmZ - stroke: 550 mmBar passage: 65 mmTurning Diameter: 500 mmTurning Length: 520 mmSpindle Speeds: 5.000 RPMSpindle Bore: 76 mmTool changer: 12 PcsOperating hours: 38.500 HoursWeight Of The Machine Ca.: 4.8 tFurther information:Including chip conveyor, transport securing equipment, documentation and accessories.The machine has been cleaned and can be inspected under power.

Ref. -No.: 10718Manufacturer: REIDENYear of construction: 2013Type of control: CNCControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: SchweizMachine-No.: 40-xxx Turning Speeds: 16.000 RPMX stroke: 1.000 mmY stroke: 1.100 mmZ - stroke: 810 mmC-Axis: 360° Spindle power: 38 kWTool Taper: HSK 63 Max. Rapid traverse: 60 m / minFurther information:The machine is offered including all available accessories and technical documentation.The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details.

Sterownik CNC: Mitsubishi M-720BM (MAPPS 2) Pojemność Ruch osi X mm: 260 Ruch osi Z mm: 520 Oś C: 360º (0,001) Długość toczenia mm: 515 Maksymalna średnica toczenia mm: ø: 356 Górna wieża Uchwyt narzędzi: 12 Główne wrzeciono Prędkość obrotowa wrzeciona: 5000 Moc napędu wrzeciona kW: 15/11 Średnica średnicy wrzeciona mm: 73 Producent: KITAGAWA Przeciwwrzeciono Skok przeciwnego wrzeciona mm: 525 Wyposażenie Przenośnik chipowy Lampa sygnalizacji Ramię pomiarowe narzędzi Światło w miejscu roboczym Interfejs dla karmnika barowego Godziny pracy Pod wpływem: 7,456 Czas cięcia: 5,423 Podstawowe wymiary / waga maszyny Długość mm: 3,495 Szerokość mm: 2,050 Wysokość mm: 2,230 Waga kg: 5,800

Tokarka CNC Okuma LB 400-M Sterowanie: OSP-E100L Rok produkcji: 2005 Maszyna wewnętrzna nr 83 Długość obrotu: 1 250 mm Średnica toczenia: 620 mm Prędkość: 3 500 obr./min Wieżyczka narzędziowa: 12 miejsc (napędzana) Uchwyt narzędziowy: VDI 40 Średnica średnicy wrzeciona: ok. 110 mm Trzęźwościanowy Kitagawa B15 Sprzęt: - Przenośniki chipowe - Urządzenie chłodzące - Touchsetter - Tylny kol

Producent: POREBA Numer modelu: TPK-90N Sterowanie CNC: SIEMENS Długość / odległość między środkami skrętu: 2000 mm Wahadłowa nad łóżkiem: ok. 930 mm Wahanie nad podwoziem: ok. 630 mm Przerwa w wychyleniu: ok. 1200 mm Średnica średnicy wrzeciona: ok. 95 mm Maksymalna prędkość obrotowa wrzeciona: do 800 obr./min Moc głównego silnika: ok. 22 kW Zwężenie tylnego kolby: Morse 6 Główne cechy: Sterowanie CNC SIEMENS, ciężka i bardzo sztywna konstrukcja maszyn, duże przechylenie nad dnem o szerokości około 930 mm, Długość toczenia 2000 mm, odpowiedni do obróbki dużych i ciężkich elementów, sprawdzone konstrukcje ciężkich tokarek przemysłowych POREBA.

Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment.

Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement.

Ref. -No.: 10026Manufacturer: SCHIESSYear of construction: 2009Type of control: CNC-SteuerungControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: DeutschlandTurning Diameter: 5000 mmTurning Diameter Over Bed: 4000 mmSpindle Speeds: 0 - 120 RPMClamping Diameter: 4000 mmCross Travel: 420 x 340 mmMax workpiece height: 3000 mmMain Drive: 52 kWMax. Tension: 120000 NMax. Payload: 50 tPower Capacity - Table: 110 kWMax torque faceplate: 100 kNmFurther information:Automatic tool changer with 80 positions(AAC) Automatic attachment changer for 6 milling headsLive spindleC-axis tableTravel of the Y-axis gantry columnsDrilling and milling head (master head principle)Straight drilling and milling head GB-1BRenishaw RBP 60 touch probeHand terminalTeleserviceInternal and external coolantOperator cabinChip conveyorSADDLE (X-AXIS):Horizontal movement from the center to the right ...

Ref. -No.: 10322Manufacturer: EKO PILLYear of construction: 2010Further information:The PMO 950K carousel jet washer is revolutionarymaintenance-free washer, extremely compact andaesthetic structure, designed for oil contamination,machining emulsions and loose chips from washed objects.Despite its minimized dimensions, it works perfectly togetherwith automated production lines for thorough washing,and optional rinsing and drying of moving partson the internal conveyor. Short distance between stationLoading and unloading facilities make it flexible.Washing, rinsing as well as drying operations take placein closed circuits, which significantly reduces costs- Gravity oil separator OGP- Fine filter EKO-PIL 20 µm- Vapor condenser with liquid regeneration- Drying heat recovery- Washing- Rinsing / Maintenance- Drying

Ref. -No.: 10421Manufacturer: SCHüTTEYear of construction: 2015Type of control: DigitalControl: DigitalStorage location: HalberstadtCountry of origin: GermanySerial no.: 3 Power consumption: 35 kWWeight Of The Machine Ca.: 6,6 t

Ref. -No.: 10434Manufacturer: OKUMAYear of construction: 2002Type of control: CNC-SteuerungControl: FANUC 18-i TBStorage location: HalberstadtCountry of origin: GermanyTurning Speeds: 10 - 2.800 RPMBar passage: 91 mmChuck diameter: 450 mmTailstock - diameter: 120 mmTurning Diameter: 550 mmTurning Length: 800 mmSwing Diameter: 800 mmSpindle passage: 90 mmSpindle nose: A2-8 Tailstock Quill Stroke: 150 mmTotal Power Requirement: 44 kWWeight Of The Machine Ca.: 8 tNumber of tool stations: 12 pc

Ref. -No.: 10436Manufacturer: SCHERER FEINBAUYear of construction: 2010Type of control: CNC-SteuerungControl: SIEMENS SINUMERIK 840Storage location: HalberstadtCountry of origin: GermanyMachine-No.: 660XX Turning Speeds: 5500 RPMSwing Diameter: 260 mmRapid Travel Speed X-Axis: 60 m / minRapid Travel Speed Z-Axis: 30 m / minTravel -X Axis: 626 mmTravel -Z Axis: 250 mmSpindle bearing diameter: 32 mmRated speed: 1200 1 / minTurret places: 12 PcsMachine length: 1685 mmMachine width: 2400 mmMachine Height: 2850 mmWeight Of The Machine Ca.: 8 tFurther information:Spindle head with short taper DIN 55026: A6Pallet conveyor WPSKNOLL system (2010)SAUTER turret (12 places)Documentation availableTools in the pictures are sold with the machine.Machine can be inspected and demonstrated under power.

Ref. -No.: 10443Manufacturer: VDF BOEHRINGERYear of construction: 1999Type of control: CNC-SteuerungControl: REXROTH INDRAMAT SYSTEM 200 BTV 30Storage location: HalberstadtCountry of origin: GermanyTurning Diameter: 520 mmTurning Diameter Over Slide Rest: 150 mmSpindle Speeds: 25 - 4.500 RPMSpindle Bore: 78 mmTool Taper: VDI 40 Rapid Traverse: 15.000 mm / minDistance Between Centres: 1110 mmSpindle motor drive: 18 kWTurret places: 12 PcsMachine length: 5000 mmMachine width: 2800 mmMachine Height: 3200 mmWeight Of The Machine Ca.: 14,5 tFurther information:2x revolver (12 places)Machine can be inspected under power by appointment.

Ref. -No.: 10461Manufacturer: IGREKYear of construction: 2026Type of control: CNC-SteuerungControl: SIEMENS SINUMERIK 840D SLStorage location: IstanbulCountry of origin: TürkiyeSpindle Speeds: 4000 RPMTurning Height: 2000 mmTable Diameter: 4000 mmSpindle power: 37 kWMax. Table load: 40 tRotate table rotation speed: 60 RPMMax. Turning diameter: 5000 mmMax. Turning height over faceplate: 2000 mmMax Spindle Torque: 1200 NmSpindle Taper: ISO 50 Machine length: 7500 mmMachine width: 12000 mmMachine Height: 9500 mmWeight Of The Machine Ca.: 125 tFurther information:Ram Slide Stroke: 2100 mmRam Section: 350 x 350 mmVertical Travel of the Moving Traverse: 2000 mmTable Drive System: Segmented Direct Drive MotorsTable Torque: 8200 Nm - 14400 Nm max.Table Guide System: Hydrostatic Bearing and GuidesIGREK DT 4000 – Your solution for precise heavy-duty machiningThe IGREK DT 4000 is a state-of-the- ...

Ref. -No.: 10474Manufacturer: SPINNERYear of construction: 2008Type of control: CNC-SteuerungControl: Siemens 840 DStorage location: HalberstadtCountry of origin: GermanyMachine-No.: AP0XXXXX Chuck diameter: 210 mmTailstock - diameter: 110 mmFeed speed X / Z: 15/24 mm / minTurning Diameter: 500 mmMax. Torque: 113 NmTravel -X Axis: 350 mmTravel -Y Axis: 230mm (-110mm +120mm) mmTravel -Z Axis: 1160 mmDistance Between Centres: 800 mmSpindle 1 spindle head diameter (flange): A8 mmSpindle 2 spindle head diameter (flange): A6 mmQuills Morse taper: MK4 Turret places: 12 PcsMachine length: 3250 mmMachine width: 1980 mmMachine Height: 2090 mmWeight Of The Machine Ca.: 7,5 tMax. swing diameter: 690 mmFurther information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mmNumber of rotating tool positions: 12Y axis + C axis.Machine can be inspected under power by arrangement.

Ref. -No.: 10475Manufacturer: SPINNERYear of construction: 2005Type of control: CNC-SteuerungControl: Siemes 810 D ShopTurnStorage location: HalberstadtCountry of origin: GermanyMachine-No.: AN0XXXX Turning Speeds: 280/400 RPMTool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mmTurning Length: 550 mmTool Taper: VDI 30 Spindle Speed Max.: 5.000 RPMTurret places: 12 PcsFurther information:Three-jaw chuck: Schunk brandDriven tool stationsOil mist extractionCoolant systemCabin, extraction Donaldson Tirit DCEMachine can be inspected under power by arrangement.

Ref. -No.: 10531Manufacturer: HONOR SEIKIYear of construction: 2018Type of control: CNC-SteuerungControl: Siemens SINUMERIK 840DStorage location: HalberstadtCountry of origin: TaiwanMachine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPMTurning Height: 2370 mmTable Diameter: 4000 mmRapid Travel Speed X-Axis: 10 m / minRapid Travel Speed Z-Axis: 10 m / minRotate table rotation speed: 1 - 85 RPMMax. Workpiece Weight: 35000 kgMax. Turning diameter: 4500 mmDistance between faceplate and crossbar support: 820-3320 mmWork feed: 0,001 - 500 mm / minNumber of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mmSpindle motor drive: AC60/75/100 kWServo motors (X/Z axes): 5,5 / 5,5 kWMachine length: 9500 mmMachine width: 7000 mmMachine Height: 8000/9100 mmWeight Of The Machine Ca.: 115 tFurther information:- 2-stage gear change- ATC (Automatic Tool Change) 16/20/24- Tool size 25 x 3 ...

Ref. -No.: 10542Manufacturer: GILDEMEISTERYear of construction: 1990Max. Rod diameter: 16 mmNumber of spindles: 6 PcsGuide rod length: 3,3 mFurther information:The machine can be viewed under power by arrangement.

Ref. -No.: 10548Manufacturer: MONFORTSYear of construction: 1998Type of control: CNC-SteuerungControl: MonfortsStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 303XXXX Chuck diameter: 250 mmCentre Distance: 1080 mmSpindle Diameter In Front Bearing: 100 mmSpindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mmMax swing diameter: 500 mmtravel of the cross slide: 265 mmTailstock outside diameter of the quill: 80 mmTailstock maximum quill stroke: 160 mmTailstock inner cone: MK 5 TypeMaterial flow max.: 70 mmTurning Speed Range: 2 - 2800 rpmFurther information:The machine can be viewed under power by arrangement.

Ref. -No.: 10657Manufacturer: EMAGYear of construction: 2008Type of control: CNCControl: Siemens Sinumerik 840DStorage location: HakberstadtCountry of origin: GermanyTurning Length: 630 mmTool Taper: VDI 40 Turret places: 1 PcsNumber of tool stations: 12 pcTurning Speeds: 5000 RPMChuck diameter: 250 mmFurther information:- The machine features an overhead drive spindle with a tailstock at the bottom.- Coolant tank, approx. 1,000 L, including - a paper filter roll.- Clamping devices: Hainbuch clamping top, including various centering tips- Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation.- Magazine loading- Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading.The machine can be viewed while powered on by prior arrangement.

Ref. -No.: 10661Manufacturer: MAZAKYear of construction: 1998Type of control: CNCControl: Mazatrol Fusion 640TStorage location: HalberstadtCountry of origin: JapanTurning Speeds: 6000 RPMSwing Dia.: 525 mmTurning Diameter: 300 mmTurning Length: 500 mmSpindle Speeds: 5000 RPMSpindle Bore: 51 mmSpindle power: 18,5 kWTurret places: 1 PcsTool places: 12 Machine length: 3023 mmMachine width: 1700 mmMachine Height: 1999 mmWeight Of The Machine Ca.: 5,3 tPole work up to max.: 51 mmFurther information:- The Mazak SQT 200 MS is built for durability and reliability- Its design ensures stability and precision during machining, even at high speeds or during long production runs.- This model features powered tools and C-axis capabilities- This model is typically equipped with the Mazatrol Fusion 640T CNC control.The machine can be viewed while powered on by appointment.

This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details.

CNC Lathe manufactured in 1996. This Mazak Quick Turn 10 features a maximum turning diameter of 160 mm and a turning length of 256 mm. It is equipped with a robust 8-station drum turret and a main spindle speed of up to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details.