wiertarkofrezarki i centra obróbcze używane na sprzedaż (3,255)

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 102 - 2000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mCompact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmControl: FANUC 31i-B spindle turning speed - stepless: 15000 U/minspindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kWpallet table size: 500 x 500 mmworkpiece weight: 500 kgdistance spindle center to table: 80 - 810 mmRapid Travel X / Y / Z-Achse: 60 m/mindimension of workpiece: 800 x 1000 mmtotal power requirement: 80 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,45 x 2,68 x 2,88 mHorizontal CNC machining centre- CNC control FANUC 31i-B- Tool changer 60-fold (BT 40 Big Plus)- 2 pallet changer(pallet 24-M16)- Table / Pallet indexing Full B axis.- Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m.- Coolant/Filtering Unit- Chip Conveyor- ExhausterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

głębokość otworu: 500 mm, powierzchnia do wypisania: - Mm, prędkość wrzeciona: 1, wymiary maszyny ca.: - mmxmmxmmweight: - tDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

x-travel: 1140 mmy-travel: 710 mmz-travel: 610 mmCNC-control: Heidenhain TNC640 table-size: 1300 x 700 mmmax. table load: 1000 kgspindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/minfeed stepless: max. 10.000 mm/minrapid traverse: 24/24/24 m/mindrive capacity - spindle motor: 7,5 / 11 kWtool change unit: 30 Pos.coolant: IKZ 40 bar chip conveyor: kWvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,25 x 3,08 x 3,00 m- Serial No.: 4P11152J1- TSC 40 bar incl. 600 liter coolant tank with paper band filter unit- Y-Axis with 4 liear guide rails!- X- and Z-Axis with 6 roller supports for each axis!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.060 mmy-travel: 610 mmz-travel: 610 mmcontrol: Winmax 9 (Upgrade)table-size: 1.270 x 610 mmmax. table load: 1.100 kgnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 100 mmturning speed range - milling: ~ 10.000 U/minpower capacity - milling spindle: 18 / 11 kWtool taper: SK 40 Tool changer: 24 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 120 mmmax. tool length: 300 mmmax. tool weight: 7 kgfeed: ~ 15,4 m/minrapid traverse X-axis: 30 m/minrapid traverse Y-axis: 30 m/minrapid traverse Z-axis: 20 m/minweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,2 x 3 mChip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - VerticalHURCO VMX 42The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 830x320x1660 mmWeight: 56 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 570x870x1710 mmWeight: 143 kgTotal power requirement: 1,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pojemność otworu w stali (średnica): 32 mmgardło: 265 mmskok otworu: 150 mmstożek MK: 3 MKrozmiar stołu: 390 x 390 mm posuwy: mm/Prędkości obrotowe: 100 - 3300 U/mincałkowite zapotrzebowanie na moc: 1,5 KWmasa maszyny ok.: 0,35 twymiary: 0,8 x 0,6 x 1,95 mNieużywana maszyna wyświetlająca z:- Nasadka do gwintowania- Zmienna prędkość wrzeciona- System chłodzeniaDane do tej reklamy zostały utworzone za pomocą ModulMWS - rozwiązania programowego firmy LogoTech oHG.

x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1400 mmy-travel: 1050 mmz-travel: 1200 mmControl: Fanuc 31i spindle turning speed - stepless: 6000 U/minspindle taper: ISO 50 spindle motor: 35 / 22 kWpallet table size: 800 x 800 mmworkpiece weight: 2000 kgdistance spindle center to table: 75 - 1125 mmRapid Travel X / Y / Z-Achse: 24 m/mindimension of workpiece: 1450 x 1550 mmtotal power requirement: 71 kVAweight of the machine ca.: 27 tdimensions of the machine ca.: 7,3 x 4,3 x 3,75 mHorizontal 4-axis CNC machining centre- Fanuc 31i CNC control- 60-position tool changer (ISO 50)- Rotary table (1° division) with 2 pallets- High-pressure cooling 70 bar with cyclone filter system- Chip conveyor- Tool loading management- Renishaw RMP 60- TS 27R tool probeSpindle running hours 6000h, running hours: 8050hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-przesuw: 700 mmy-podróż: 420 mmz-podróż: 610 mm-rozmiar: 1260 x 490 mmstożek wrzeciona: HSK E50 zakres prędkości toczenia wrzeciona: 36000 U/min jednostka wymiany narzędzi: 42 waga maszyny ok.: 5 tHEIDENHAIN TNC430Chłodziwo przez spindlewww.marcels-maschinen.ch Dane do tej reklamy zostały utworzone za pomocą ModulMWS - rozwiązania programowego firmy LogoTech oHG.

bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 2000 mmz-travel: 1600 mmspindle diameter: 150 mmspindle taper ISO: 50 spindle stroke: 700 mmspindle turning speed - stepless: 5 - 2500 U/minrapid traverse: 10000 mm/mintable surface area: 1600 x 2000 mmworkpiece weight: ca. 20 tspindle drive motor: 50 kWfeeds x/y/z -stepless: 1 - 9999 mm/mintable positioning: 360.000 °total power requirement: ca. 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,0 x 8,0 x 4,5 mHorizontal drilling and milling machine / machining centre in cross-table designwith:2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR410 for all axes with V24 interface, punched tape reader, new electrics,new hydraulics, new servo motors, measuring probe for workpiece measurement- 60-position chain tool changer model WM III k02- B-axis (table rotary adjustment) 360,000 °- IKZ - internal spindle cooling, 20  ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pojemność otworu w stali (średnica): 28 mmgardło: 200 mmskok otworu: 105 mmpowierzchnia stołu: 360x340 mmOdległość wrzeciona/stołu max.: 540 mmzakres prędkości toczenia - bezstopniowy: 120-3000 U/mincałkowite zapotrzebowanie mocy: kWmasa maszyny ca.: twymiary maszyny ok.: mDane do tej reklamy zostały utworzone za pomocą ModulMWS - rozwiązania programowego firmy LogoTech oHG.

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode  ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Producent: LINEMATIC Modelu: LM34/705 Rok produkcji: 2004 Moc: 14 kW Napięcie: 400 V, 20 A, 50 Hz Faza: 3-fazowa + neutralna + uziemienie ochronne Certyfikat CE Dowiedz się więcej tutaj -/ Skontaktuj się z nami pod adresem -