maszyny do napojów używane na sprzedaż (1,876)

Additional title: y. o. c.: mostly 2003, Finished wort: 150 hl , Grist: 2500 kg, Current: three-phase A.C. current, Voltage: 400 V, Frequency: 50 Hz, Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage , Periphery: lauter wort heater, vapor condenser

Additional title: stainless steel brew vessel, Total volume: 300 hl, Area approx.: 15 m², Specific false bottom load: 165 kg/m², Frame height: 2 m, Material: Stainless steel, Features: Outlet vent bracket, entrance dome (DN600), inspection glas (DN600), CIP warning light, door safety switch, interior lighting set (IP54)

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...

This vertical tank from König und Günther is a robust and reliable solution for storing liquids in breweries or beverage production facilities. With a capacity of 50 hl, it is designed for optimal use of space in a vertical position. The tank has a stable construction on three feet, a width of 1.5 m, a height of 3.7 m, and a weight of 300 kg. Its solid construction ensures safe and long-lasting operation and makes it suitable for a wide range of process applications. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: vertical tank, Capacity: 50 hl, Width: 1.5 m, Height: 3.7 m, Weight: 300 kg, Position: vertical, Base construction: on 3 feet

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

A complete - with a production capacity of approx. brew is for sale. The brewhouse comprises a mash tun, mash kettle, lauter tun, and wort kettle. The system was modernized and rebuilt several times between 1990 and 2001, resulting in a combination of traditional copper construction and modernized stainless steel components. The brewing vessels are robust and efficient in design: the mash tun and lauter tun are made of copper, and the wort kettle also has a copper core with stainless steel inner lining and an integrated inner boiler. The mash tun is made of stainless steel (1977). The equipment also includes a pan vapor condenser, wort cooling, plate cooler, and peripherals such as a spindle station, wort pumps, drain pump, and hot water tank. The CIP system allows for convenient cleaning of the wort kettle, including two 20 hl containers for lye and acid; the remaining vessels can ...

This vertical conical fermentation tank (CCT) from Christian Gresser Behälter- und Anlagenbau GmbH is designed for controlled fermentation and storage and has a volume of 76 hl, an operating pressure of 0 bar, and an operating temperature of 20 °C. The stainless steel tank with a conical bottom is equipped with cooling zones (glycol, 0.9 bar; cone: 14 l, jacket: 34 l) and its own temperature control system, which enables precise temperature control during the process. Other features include a manhole cover, a DN65 outlet, a pressure gauge, a safety valve, a vacuum valve, a load cell, a DN25 spray pipe, a CIP line, a ladder rod, and lifting eyes, making it a fully functional solution for professional beverage production operations Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Yeast tank with temperature control, Volume: 76 hl, Operating pressure: ...

Pralka do butelek O + H Contina typ E44C / 302-110 Rok produkcji: 1995 Pojemność wyjściowa ok. 30 000 BPH w tym system sterowania PLC Siemens S7 w tym panel dotykowy HMI w tym w pełni automatyczny system transportu buteli w tym zintegrowane systemy bezpieczeństwa i zatrzymanie awaryjne w tym szafa sterująca elektryczna Maszyna wykonana jest ze stali nierdzewnej i nadaje się do zwrotnych butelek szklanych. Maszyna jest nadal produkowana do listopada 2026 roku w Niemczech.

Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism

Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...

Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.  

Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  Capacity: 12 kegs/hour Cleaning stations: 2 Heating: Steam Formats: S-type kegs

This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Avai ...

Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm

Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based o ...

Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line  

Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection

System warzenia wyposażony jest w kotł do brzeczki o pojemności 470 l oraz kadł lauter o pojemności 500 l. Ogrzewanie jest elektryczne o mocy grzewczej 21 kW. Ogrzewanie jest w ścianach i podłodze rozkazał. Wydajność browaru wynosi maksymalnie 74%. Oryginalna gęstość może być warzona do 18 stopni Platona . Dwunaczyniowy warzenie, składający się z kombinacji kaczki zacierowej i kotła brzeczki oraz Jednostka lauter tun/wir. Pod beczką zacierową znajduje się bardzo wydajna pompa, za pomocą której brzeczka jest mieszana i przeprowadzana między urządzeniami za pomocą węży. można tu przetransportować. zarządzanie recepturami, automatyczny program do zacierania, funkcja timera i instrukcja Tryby pracy obsługiwane są za pomocą systemu sterowania wyposażonego w 7-calowy wyświetlacz dotykowy. Wbudowany wymiennik ciepła płytowy do przygotowania ponow ...

Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.

Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available

Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model  ...

Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler |  ...

Przegląd Maszyna do mycia butelek została zbudowana przez niemiecką firmę Krones w 2011 roku. Był używany przez dużego producenta napojów aż do końca i jest nadal montowany.  Szczegóły techniczne Pojemność: 20 000 bph Formaty: 0,25l i 0,75l Liczba butelek w rzędzie: 22 Sprzęt Siemens S7 Rozładowanie etykiet Rozpylanie rotacyjne Maszyna ciągła Korpus ze stali nierdzewnej Kopia dokumentacji Kopie zapasowe Pompy ze stali nierdzewnej Pomiar przewodności Zadanie palcowe Części zamienne Końcówki butelek Podpory ogniw butelek

Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min.  ...

Overview  This monobloc filler for still water was manufactured in 2013 by the French company Gangloff-Scoma. The machine is designed for atmospheric filling of PET bottles ranging from 0.33 L to 2.5 L, currently configured for 1.5 L bottles with a 29/25 neck finish. The filler operates with a mechanical gravity filling system optimized for still water and can reach an output of up to 38,000 bottles per hour. It remains installed, in working condition, and is immediately available for inspection and use. Technical data  Application: Still water Filling System: Mechanical gravity (atmospheric) Capacity: Up to 38,000 bph Bottle Formats: 0.33 L – 2.5 L (currently set for 1.5 L) Neck Finish: 29/25

Przegląd Aplikator do uchwytu został wyprodukowany przez niemiecką firmę B&W Solutions GmbH w 2014 roku i do tej pory był częścią linii napełniania wody do PET.  Dane techniczne Całkowita wydajność: 60 cykli/min długość jednego pasa 3660 mm | szerokość 1790 mm | Wysokość 2500 mm zalecane specyfikacje: Taśmy samoprzylepne: szerokość: 25 mm, grubość: 78 μm, przyczepność do PE: 30 N/cm², wydłużenie: maks. 40% Paski papierowo-kartonowe: grubość: 180–350 g/m², szerokość: 20–25 mm (±0,4 mm), długość: 150–240 mm (±0,4 mm)