maszyny do napojów używane na sprzedaż (1,753)

- Moc: 20 do /h - Ze zintegrowanym ściskaniem - Z klapką do regulacji jagód i Ściskanie lub po prostu ściskanie Wymiary: - Długość: 2250 mm - Szerokość: 650 mm - Całkowita wysokość: 1650 mm - Wysokość ramy U: 600 mm

- Stojący szklany cylinder - Bez zaworu odciążającego ciśnienia do butli gazowej - Przyłącza: 1" gaz

- Rok budowy: 1996 - Półautomatyczne

- Materiał: stal nierdzewna - Długość: 3000 mm - Szerokość: 600 mm wewnątrz 1200 mm na zewnątrz

- Maszyna jednogłowicowa - Kierunek jazdy: R - L - Różne formaty butelek - Stan: bardzo dobry

Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separ ...

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Avai ...

Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With it ...

Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts

Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic ...

Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: SMI Model: TF 300 Machine type: Tray forming machine (tray erector / tray packer) Year of manufacture: 2002 Capacity: approx. 23 packs per minute Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Automatic tray forming system Suitable for beverage multipack tray applications Integration capability into existing packaging lines

Overview  This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 3,000 bottles / hour (according to manufacturer)  Formats: Currently set up for 330 ml longneck bottle  Counter-pressure filler with double pre-evacuation  Total operating hours: less than 1,000 hours  Running direction: right - left  Filling valves mechanical electropneumatic  Mechanical height adjustment  With color touch screen monitor  Dismantling and transfer took place in December 2023/January 2024  Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table 

Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 40,000 b/h and is in a good condition.    Technical Data Capacity: 40,000 bph  Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KH ...

Overview This crater was built in 2008 from German manufacturer Rico. The machine was running until January 2025 and is now stored in the company. Technical Details Capacity 1.600 crates per hour Equipped for following crates / bottles 500 ml NRW glass bottles into 20er crates, 4x5 formation 330 ml Longneck glass bottles into 24er crates, 4x6 formation 330 ml Steinie glass bottles into 30er crates, 5x6 formation 330 ml Swing-top glass bottles into 20er crates, 4x5 formation With a Siemens S7 control With a magazine for the packing heads

Overview  This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Technical data  Capacity: From 9,000 bph to 12,000 bph Formats: 75 cl glass bottles Application: Cork caps for cider bottles Scope of Delivery BERTOLASO DELTA 512 S solo capper

Overview  This canning machine 100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)  

Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Ang ...

Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt heigh ...

Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data Manufac ...

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 21,000 bottles per hour (bph) Bottle Formats: 1.5 L and 0,5 L  Worked Labels: IN REEL two label-roll magazines, one applicator Run Time: Approx. 39,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine best-before date coding is available (Videojet Excel 170i Ultra High Speed)

Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET- ...

Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) Formats possible: 250 ml – 1,000 ml Formats included: 330 ml and 500 ml long neck bottles Bottle cap type: 26 mm crown caps Execution: Filler/capper: Modulblock 10/1-C Labeler: LLAC-R-SQ (VAR STEP) Additional features: Hot foil stamper (added later) CIP dummy bottles Change parts for 330 ml format

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

Overview  This complete 500 L brewhouse package was manufactured between 2016 and 2017 by leading European companies, including Speidel, Spagni, Skrlj, Sommer, and MTA IT. Designed as a turnkey solution for small to medium-sized breweries, it includes all key equipment for mashing, fermentation, chilling, capping, labelling, and malt processing. The system was previously operating at 600 bph and can be adapted for up to 900–1,000 bph. It is offered for sale as the brewery has ceased operations and is immediately available. Technical Details  Brewhouse capacity: 500 L (Braumeister 500 L, atmospheric) Fermentation capacity: 4 × 625 L (total 2,500 L) Formats: 26 mm crown caps (adaptable to 29 mm) Labeller type: Self-adhesive, semi-automatic, for cylindrical bottles Malt mill capacity: 150 kg/h Chiller: MTA TAEevo TECH 015, 3.8 kW, refrigerant R410A Production speed: 600 bph (adaptable  ...

Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: Capacity: app. 2.800 crates/h Formats: 0,7 l GDB in 12er crates 0,5 l GDB in 12er crates Crate dimension: 356 x 275 x 257 mm (0,5 l GDB) 356 x 275 x 346 mm (0,7 l GDB) Electrical control Siemens S7 control Caps For the decapping of aluminium and plastic caps, 28 mm

Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo